CLAAS LEXION 760 combine harvester, 2012.
Complete with VARIO 9000 harvester + trolley
Delivery from Poland.
AUTOCONTOUR - active copying of the surface both in the longitudinal and transverse planes LASERPILOT, laser head for installation on the left header. Bracket for installation on a harvester заказывать с жаткой!!
The attachment drive is standard, with a power of 80 kW for all grain headers up to 12 m.
Double action harvester lifting cylinder
Tilt camera reinforced HD, with CRUISE PILOT
Automatic towbar
Extraction of dust from an inclined chamber
Autopilot modules on the harvester
Forced brake of the drive of the harvester
Universal threshing drum, closed type for all grain crops, the distance between the drum bars is 10\6.5\7\18mm
Stepless threshing drum drive 395-1150rpm
Stepless separation rotor drive 360-1050 rpm
Hydraulic regulation of rotor flaps
3-D cleaning for work on slopes with a slope of up to 20%
Chaff spreader with a device for feeding chaff into a radial straw spreader
Cleaning fan lining
Visual mass control in a grain elevator
Jalousie cleaning sieve - standard type max. the distance between the plates is 20 mm.
Grain hopper with a volume of 10,500 l, top discharge
Выгрузной шнек XXL$ Distance from the center of the harvester to the unloading point 7902mm
SPECIAL CUT straw chopper with radial distributor
(//tractor-service.com)
Drive for radial spreader
Front axle with hydrovolume transmission with electric GST control; hub 10 holes.
Tires front axle. 650/75R32 172A8 MICHELIN$disk
wheels with 10 mounting holes for pairing wheels
Here is the rear one with non-adjustable track width.
Rear axle tires 500/85R24x225 IMP, wheel disc with 10 fastening holes
The maximum speed is 20 km/h.
MERCEDES OM 502 390 kW / 530 hp (ECE R 120) with compressor $8 cylinder V-shaped diesel engine with a working volume of 16 liters and electronic injection
Fuel filter preliminary standard
Special air filter
Fuel tank with a volume of 1150 liters.
Cabin with climate control
Refrigeration chamber
CEBIS on-board computer with 2 slots for memory cards
Printer for CEBIS
Preparation for the CEBIS MOBILE terminal in the cabin
Remote diagnostics CDS Remote + license for 1 hour for diagnostics by the service department through the telemetry system
Quantum meter with constant humidity measurement
Operator's seat on air suspension
Xenon working lights
Module for controlling CEMOS/CRUISE PILOT and cleaning 4-D
Communication module (CCM)
Multi-functional control lever of the standard type
Electric adjustment of the position of the mirrors
Additional information by phone.