QDX drainage and irrigation pumps are intended for water supply from wells,
cisterns, pumping rain filtration water, filling or draining pools, baths, water attractions. It has a good pressure, while it has no losses during the volume supply of water.
Features:
- winding 100% copper with a double layer of varnish with a built-in thermal relay, which allows you to protect the engine from overheating;
- the working impeller, thanks to which water is pumped, is made of primary technopolymer with a brass sleeve, so it is not subject to abrasion by sand and clay;
- the electric cable is intended for the supply of electricity to the engine working for a long time in the water. The operating temperature range is from -40 °C to +65 °C, the service life is up to 20 years;
- the pump body is made of ADS12 aluminum. The upper cover has a double seal, unlike similar models of other TMs, which prevents water from entering the pump motor. The bottom mesh-filter is made of stainless steel grade 201;
(//tractor-service.com)
- the electric pump is equipped with a float switch, it is used to automatically turn on or off the electric pump, it allows you to maintain a given level of liquid, if the liquid reaches the minimum permissible level, the float will turn off the pump.
The pump has a high-quality painting consisting of four stages:
1) is degreased in a special chamber;
2) The 1st layer of primer is applied by electrophoresis;
3) the 2nd layer is applied with powder paint and baked under high temperature;
4) 3rd layer of waterproof varnish.
To simplify installation, the pump is equipped with an adapter fitting .