LKT 82 After NGO Special Forest Tractor with Hydrostatic Transmission, Ternopil Region

ТЕХНІЧНІ УМОВИ LKT 82 :
1. The machine is designed for full -fledged wood -wrapped wood rolling method
(two -barrel winch), for free approaching wood, hydraulic crane -
= manipulator with a grapeir, for storage of logs up to 1.5 m in height and moving them
= dump that can also be used for excavation work to a small depth on
flammable soils.
The machine can towing trailers without a brake weighing up to 3000 kg. By installing a three -point
Hanging, the car can be used for household work in the forest or for
agricultural work. The machine can be equipped with remote control
by all the main functions.
2. Iveco 93 kWh engine corresponding to euro III conditions
New.
3. Hydrostatic drive with a hydrostatic converter
Sauer - danfoss, with a two -stage mechanical box
gears
4. Bridges with a multi -displayed differential lock,
electro -hydraulic blocking of differential,
double -circuit brakes, wet multi -dish
5. Safe cabin that meets the ROPS, FOPS rules,
Ops, with Lexan glass equipped with ventilation, rotary
Seat 180 °, control the machine forward with
steering wheel, joysticks and pedals
6. Axial connection of the frame (bearing) - new
7. The winch with two drums with the force of winding mines. 2 x 80 kN with a rope with 13 mm
8. Підготовка до кріплення гідравлічного маніпулятора: опора після КР, педалі для управління
= by machine back, danfoss joystics,= (// tractor-service.com)
ліва рука - НОВІ
9. The remote control of Terra Funk
FA7,
10. The rear shield with the clamp of the logs (Klembank) -
НОВИЙ
11. Wheel disks Fromшинами Nokian 540 - 30 for
лісового господарства - НОВІ
12. Рампа освітлення (на кабіні)
13. Loglift F81R56 crane manipulator, with
Grafer and rotator
14. Machine with full accompanying documentation, namely:
- commissioning of the machine into operation and training of the operator in writing
- технічне свідоцтво
- Operation Manual
- Instructions for repair and mainten List of repair works:
ПЕРЕЛІК РЕМОНТНИХ РОБІТ :
1. Демонтаж LKT
2. Kr box of gear
3. CR bridges including replacement of worn and damaged components
4. КР гальмівної системи
5. Kr winch, replacement of seals and faulty details, bench tests
(новий трос).
6 7. KR RAM, including dump, shield and fuel tanks
7. КР рам, включаючи відвал, щит і паливні баки
8. Нові картриджі та фільтри
9. Wiring repair
10. Checking the assembly, run -in