Machine for removing seeds from cherries, cherries 250-300 kg/hour Harver DM300x2, Zakarpattia region.

Ar-Tech company provides For your attention, our new development - cherry pitting machine Harver DM300x2. The machine is designed for pitting fresh cherries,cherries. The productivity of this machine depends on the size of the fruits and is on average 250-300 kg/hour.

The main advantage of this model is 2 drums with 9 holes in each, which allows processing 50% more cherries than similar equipment.

It is possible to operate the machine with cherries after freezing. The temperature of cherries should be: - 6°C to - 8°C.

The machine is almost entirely made of food-grade stainless steel AISI304, as well as kaprolon and duralumin. Its structure corresponds to all applicable safety standards, sanitary and hygienic standards and is suitable for use at enterprises and food industry workshops.

Features:
- The machine works both with small-sized cherries and with large fruits of cherries and cherries.
- The diameter of the fruit is 18 to 25 mm (28 is optional). 3 drums with different holes to choose from, depending on the size of the cherry.
- High productivity: 1260 pitted cherries per minute, 18 cherries simultaneously.
- Essential economy of time and operational expenses.
- Feeding of new fruits into the cells occurs automatically.
- Ease of cleaning and maintenance.
- The corresponding parts are easily removed and washed.
- Minimum payback periods due to high productivity and low cost compared to other similar machines.
- Warranty 12 months.
(//tractor-service.com)
HARVER DM300x2 is an industrial-type machine for use in confectionery and bakery shops, as well as small enterprises for freezing fruits or production of dried fruitsсухофруктов. The machine is not a household appliance and requires qualified service personnel.

Principle of operation:

Cherries are loaded into the receivingемкость and rolled into cells in working drums that rotate 12 steps per full revolution. Cherries that have fallen into the corresponding cells are delivered to the processing area, where sharp plungers of a special shape, penetrating through the center of the fruit, remove the stone, directing it into the hole with a rubber cuff. The bones fall into a bone receiver with an auger, which removes them from the working area. The plungers return to their initial position, the drum rotates to the next steps, and the knocked-out cherries fall to the other side of the machine, falling into the storage container installed by the operator.

Technical data:
- Productivity: 250-300 kg/hour
- Power supply: 230 V/50 Hz
- Weight: 85 kg
- Installed power: 0.37 kW
- Dimensions (LxWxH) W - without tray/with tray: 880 x 500/730x750 mm

There are also machines with greater productivity.

You are guaranteed to receive a profitable offer upon request to our email address:[email protected].
We will answer all your questions by phone: +380997174185/+380970308051, +380953376425, or by e-mail.
The price on the site may differ from the actual price.
We look forward to hearing from you.
Sincerely, AR-Tech company.