All products
All found, ads: 245
Page: 8
← previous ... next → 
4
324 UAH.
Krasnyanka BDVP bushing with two grooves of the old model (square hole)
- used in the bearing unit on the disk harrow "Krasnya...Price: 324 UAH.
3
2304 UAH.
Axle OZZH 00.652 of the support-drive wheel is used on the seeder SZ-3.6. It is the main bearing element of the drive wheel. It provides reliable...Price: UAH 2304.
294 UAH.
PBL 02.507 bar (2 holes) - used on PBL (PNB) 4-40, 5-40, PNYA 4-42 series. Weight - 2.3 kg.
...Price: 294 UAH.
4
1011 UAH.
Half-spool BDVP - used for disc harrows: "Krasnyanka" and "Solokha". There are two types of half-spool of the new BDVP model: with ...Price: 1011 UAH.
2
162 UAH.
Bolt M 24*285 - used on plows of the PLN 3-35 series. It is used to fasten the body to the plow frame.
weight - 1.14 kg.
There is also a bolt M ...
3
5560 hryvnias.
Round plow body stand (d=75) is installed on PTK-9-35 plows. The rack undergoes heat treatment. Weight - 26 kg.
We produce the entire range of spare parts...
5
54,000 UAH.
Hinged plow PLN-3-35-01 (with a front plow) is intended for plowing soils for grain and technical crops on depth up to 30 cm.
The plow uses...
327 UAH.
Wheel clamp PNU 00.636.04 - used on PLN 5-35 series plows. Used to fasten the wheel to the plow. Weight - 2 kg.
We produce the entire spectrum from...
3
87 UAH.
Prism KRN H 089.01.207 - used on cultivator KRN-5,6. It is used to fasten the rod of the KRN holder to the frame of the section of the working bodies. Fastens...
2
79.5 UAH.
BDT rack pressure - used on the disc section of the BDT disc harrow. It is used to fasten the case in the rack.
It is made of sheet metal...
4
426 UAH.
Front plow blade made of steel 45, welded with hard alloy. It is attached to the front plow post with two PM 12*40 bolts.
Welded with hard alloy...
2
4187 UAH.
Stand PNL 01.304-01 - used on plows of the PP 8-35, PNL 8-40 series. It is used for fastening working bodies to the frame. Manufacturing method ...
3
275 UAH.
BDT-7 curved stop (glass) - is used in the disk section of the BDT-7 harrow, serves for tight fit of disks in the disk section.
Method ...
Long reinforced shaft of cultivator KPS 00.060 - is a transition link between the working body and the frame. It is made of a profile pipe 40x60 mm, thick...
150 UAH.
Slat H 089.01.501 (per section KRN) - used on KRN-5,6 cultivator. It is used to fasten the section of working bodies to the KLT bracket.
Weight...
6
21,000 UAH.
Plow frame PLN 3-35 for front plows is a composite triangular structure consisting of a main beam with welded brackets for fastening ...
3
4905 UAH.
Stack PBL 01.200 is used on plows of the PBL 3-35, PNB 3-35, PBL 4-35, PNB 4-35 series. It is used to fasten the body to the plow frame.
Manufactured by...
196 UAH.
PLZH side cover 51.502 - used on PLN, PBL, PNL, PNB series plows. Serves to increase the service life of the sidewall. Manufactured by...
3
2616 hryvnias.
PNP strip 04.411 - used on plows of the PLN 3-35 series with a front plough. It serves to fasten the second plowshare to the frame.
Technical characteristics...
2
207 UAH.
KRN H 063.218 cultivator clamping nut - used on inter-row cultivators KRN-4,2 and KRN-5,6, installed on the section of working bodies and с...