Trailed roller-shredder water-filled cutting (KIR-6), Poltava region.

Trailed water-filled shredder roller (KIR-6) hydrofed. The roller is intended for grinding plant residues after sunflower, corn, stubble, leveling and partial mulching of the field surface.Roller shredder harvest residues is a special equipment that will turn harvest residues, stubble and straw into a homogeneous, thoroughly mixed with the upper layers of the soil nutrient layer with minimal labor costs. During autumn and winter, the crushed green mass will rot and only increase soil fertility, which will have a positive effect on future productivity.
Distinguishing features:
• due to its own transportwheels allow to quickly move from field to field and over considerable distances;
• due to the optimal distance between the knives of the chopper of 18.5 cm, the knives do not clog with wet soil.
• due to the diameter of the roller, which is 584 mm, as well as the high working speed of 12-20 km/h. the processed area increases;
• due to the reliable and proven frame KZK-6, the service life and reliability of the rink increases.
we put a maintenance-free bearing unit with agricultural sealing from FKL
Thanks to the built-in silent block in the housing, the bearing assembly withstands three times the compensating forces of the impact. Additional protection with a rubber ring is worth it.
The bearing unit is protected against water, ultraviolet, abrasive material and other factors that have a negative impact on the bearing.
Features:
Productivity 7.2 ha/hour
Working speed up to 12 km/h
Transport speed up to 20 km/h(//tractor-service.com)
Working width of capture 6.0 m.
The diameter of the roller is 470 mm.
Number of rollers 3 pcs.
The number of cutting knives is 120 pcs.
Dimensions, m:
– in working position (L/W/H) 3.45x6.0x1.0
– in transport position (L/W/H) 4.75x2.3x1.6
Unit weight 1900 kg - WITHOUT WATER
WEIGHT WITH WATER 2100 KG.
Powertractor (not less) 80 hp
Trailer type

HOME DELIVERY IN ALL REGIONS OF UKRAINE! WITHOUT PREPAYMENT!