New sunflower harvester SUNFLORO LIGH SUNSPEED, working width from 9 m to 12 m, Nikolaev region.

Sunflower harvester Sunfloro developed in 2018.
Reapers forSunfloro sunflowers" (Sanfloro), produced by the "Sanfloromash" Machine Building Plant - this is a fresh design solution aimed at minimizing costs during harvesting.
The new "SUNFLORO LIGHT" harvester is the result of the implementation of new solutions in the design of the harvester, which allowed to significantly improve its technical and operational indicators, reduce specific weight and cost compared to analogues. Sunflower harvester ЖШ-8.5, ЖШ-9.5, ШШ- 10.9m (grip width along the toes 11.3m)
The drive of the harvester is divided into two cardan shafts.
The stretching shaft is renewed under the beam, the cut is obtained exclusively near the sunflower basket.
The shaft prevents other green mass from being cut.

The profile of the finger beam combined.

Reinforced braces connect the frame at critical points, thereby ensuring minimal deflection of the frame as a whole.

Thanks to the use of high-precision CNC equipment in the manufacture of parts, it was possible to significantly reduce the number of welds and, as a result, the stress from welding, which increased the strength of the structure, its reliability and durability.

Cutting device
(//tractor-service.com)
Schumacher planetary drive reducer, Pro-Gut 7 tpi segments made in Germany. SCH 19036 guide and SCH 19035 pressing rollers of the "Schumacher" company were introduced instead of friction plates, which allowed to reduce the friction of the knife strip on the beam from 15% to 2%, thereby significantly extending the service life of the device.
Pulling (combing) shaft

The ZhSB-10.9 model has an auger and a reel with an intermediate adjustable support, the introduction of which reduced the deflection of the latter by 40%, significantly reduced the stresses from frame torsion.

The new design and method of fastening the bumper and the galvanized protective net on it allow optimal protection of the working area of ​​the auger and reel, excluding product losses. The range of adjustment of the height of the bumper above the stem lifters of 180...450 mm allows you to harvest sunflower of any variety at any yield. The bumper is painted with wear-resistant polyurethane paint Novatic produced in Germany.

The harvester is equipped with original bearing assemblies of the SNR company (France, the best manufacturer of automobile bearings in Europe). Self-contained auger and reel drive.

The above changes made it possible to optimize the technological process of sunflower harvesting, to reduce product losses to a minimum.
The strength of the harvester increased, its reliability increased, the service life increased, and consumer qualities improved.

Warranty 24 months.
Frame warranty 62 months!

Delivery to any region of Ukraine: Vinnytsia region, Volyn region, Dnipropetrovsk region, Donetsk region, Zhytomyr region, Zakarpattia region, Zaporozhye region, Ivano-Frankivsk region, Kyiv region, Kirovohrad region, Luhansk region ., Lviv region ., Nikolaev region ., Odesa region ., Poltava region ., Rivne region ., Sumy region ., Ternopil region ., Kharkiv region ., Kherson region ., Khmelnytsky region ., Cherkasy region ., Chernivtsi region ., All regions of Ukraine