Made in Germany directly from the manufacturer/Press-granulator T-940, Lviv region.

Press-granulator T-940/ Production period: 26 weeks.

It is designed for the processing of products rich in fibers and for the production of pellets.
Drive electric motor - 250 kW (750 rpm).
The position of the drive is left (if you look at the press pellet - from the front).
It consists of:
The welded body of the press is made of bent heavy plate metal.
The durable metal structure is processed on CNC machines.
The main shaft is made of alloy steel,
installed in the body with brass bushings. It is protected from twisting with shear pins.
When reloading occurs, the pin is destroyed.
saving all working units of the pellet press.
The main shaft has lubrication channels,
which provide lubrication to the main bearings, as well as to the roller bearings.
The holder of the matrix (rotor) is installed on the main shaft with bearings of increased size.
The matrix holder is made of alloy steel with a painted surface.
The solid design of the matrix holder ensures smooth operation.
with a high moment of inertia, thus the transmission of the press is protected from overload. The large diameter of the rotor has a high degree of safety for absorbing high loads during pressing.
A replaceable ring is installed at the point of contact with the matrix,
which prevents the creation of backlash.
The press-pellet rotor is equipped with a cast-iron pulley, V-belt transmission.
The additional mass of the disk increases the moment of inertia of the rotor. An amplifier ring and an input funnel are used in the matrix installation.
The diameter of the matrix is 935 mm. Matrix width - 108 mm.(//tractor-service.com)
It is possible to modify the press to use a matrix with a width of 138 mm.
The presence of a matrix in the delivery is indicated as a separate element.
In the body of the pellet press there is a rod for a manual pulley to facilitate the work of disassembly and installation.
matrices and rollers.
Rollersgranulator must be installed on axes with a fuse and a cover of the press made of stainless steel and have as a part a bypass valve with a controller from an air pressure cylinder, which directs the product flow in case of overload in the pressing chamber..
In the upper part there is a protective magnet.
the press is installed against accidental magnetic inclusions. Fuse on the cover of the press and on the side service door.
Knives for cutting pellets are located on the body and on the axes of rotation,
which are not subject to jamming due to contamination by product particles.
Knives are adjusted from the outside, when the press is in working condition or when the cover is open.
The drive system is a movable plate on which an electric motor, a clutch and a drive pulley are installed in the bearing units. A set of drive belts. Temperature control of drive pulley bearings. The lubrication distribution system for the bearings of the pressing shafts and the main shaft is connected to the self-lubrication system.
The presence of self-lubricant in the scope of delivery is indicated as a separate item.
Sampling of pellets.
The presence of a set of tools in the scope of delivery is indicated as a separate item.
Coating of external surfaces - polymer paint. The production material of parts in contact with the product is corrosion-resistant steel.
Set of spare parts:
Manual pulley, matrix and roller remover, pins - 10 pcs.

Note:
The area is not correct due to the page/site not being recognized.

Contact is also possible via WhatsApp, Skype
Phone +49 176 316 999 37
Hamburg/Germany