Chopper, mulcher BOMET 1, 2-1, 4-1.6 and 1, 8m 2, 0, Odessa region.

A threshing mower is a machine installed on a tractor equipped with a three-point linkage system cat. II. The threshing mower is mainly used for the destruction of plant residues after harvesting, for mulching meadows and pastures, as well as for crushing cut branches of shrubs in gardens where soft fruits and garden plants are grown. The machine is ideally suited for use in gardens with row planting, where it is necessary to move the axis of the machine relative to the axis of the tractor. The hydraulic lateral shift, which can be set as a variant, has a max. 35 cm and makes it possible to bypass obstacles and avoid damaged plants by the tractor while the machine is running, e.g. in gardens.

The threshing mower can be equipped with Y-type cutters or threshingdisks. Y-type cutters are intended for cutting grass, anddiscs are used for chopping small branches and bushes. During operation, the machine rests on two supporting wheelsколесах, which, by simply adjusting the height, allow you to ensure the required degree of grinding of the material.

Technical characteristics

Title

Z317

Z317/1

Z317/2

Z317/3

Width of capture

m

1.4

1.6

1.8

2.0

Number of threshing discs

pcs.

20

24

28

32

Number of incisors type Y

pcs.

40
(//tractor-service.com)
48

56

64

Max. diameter of cut branches

mm

30

Rotor rotation speed

rpm

1620

Transverse movement

mm

to 350

Mass of the machine

kg

380

440

490

545

Required power

kW / hp.

25 / 35

33 / 40

36 / 50

45 / 60