Cultivator plant feeder KRN-5, 6 (9 section) and KRN-4, 2 (7 sections), buy KRN, KRN, Dnipropetrovsk region.

A reliable tool for your household.

Cultivators are intended for inter-row processing and fertilizing of crops of high-stem field crops with 60-70 cm inter-row spacing.

Processing width: 4.2 m (6 rows), 5.6 m (8 rows), 8.4 m (12 rows), - depends on the power of the tractor. KRN cultivators are aggregated with tractors from 80 horsepower.

Complete set of KRN-5,6 with transport device and IED (fertilizer application system) includes:
- Main frame, profile pipe 140x140 mm., wall thickness 6 mm.;
- Tractor hitch lock;
- Two supportingwheels on racks;
- 9 sections;
- 16 squares and 16 racks for a razor paw; 186
- 9 стоек под стрельчатую лапу;
- 8 left-handed razor paws;
- 8 right razor paws;
- 9 arrow legs (grip width 270mm); 190
- Комплект кронштейнов крепления;
- Set of stirrup brackets;
- A set of prisms and overlays;
- Set of hardware (cultivator bolts, grover, nuts); 194
- Комплект транспортного устройства;
- IED (set, 8 plastic bunkers).

Standard equipment of working bodies of the KRN section: left razor blade, right razor blade, 270 mm wide arrow blade.

Additional equipment of the KRN section: central hiller, left/right hiller, ripper bit, fertilizing bit.

Also, our company provides a service for the KRN cultivator and KRN sections of our production, which can be purchased separately.(//tractor-service.com)

Estimated prices for 2023, in hryvnias,
special price/ price from FLP/ price from LLC with VAT:

- KRN section without working bodies: 6810.00/ 6946.20/ 8335.40,
- KRN section with working bodies: 7884.00/ 8941.68/ 9650.10.

We reserve the right to change the price, both higher and lower, due to the volume of the order, the form of calculation and balances in thestock. The exact conditions of delivery will be communicated by phone on the day of your application.

Constructive features of the KRN section

1. Bearing 180503 (62203) is installed in the bearing unit. The bearing is closed with rubber caps (plastic seals) and is reliably protected from dust and moisture due to the tightness of the plugs;

2. Oil pans are installed in the bearing housings;

3. Bearing housings are protected by metal anthers;

4. The bearing housing of the supportingwheel is protected by oil seals and metal anthers; 5. Hinged parts (prisms, overlays, tensioning screws, brackets, holder rods) are covered with anti-corrosion enamel;

5. Навесные детали (призмы, накладки, стяжные винты, кронштейны, стержни держателя) покрыты антикоррозионной эмалью;

6. Chrome brackets, anthers, springs and hardware are installed on the section;

7. The product is painted with high-quality powder paint;

8. Discs of the support wheel of the section are covered with hammer paint by baking. Such a coating not only protects against corrosion, but is also particularly resistant to mechanical damage.

Production and warehouse in Dnipro, Dnipropetrovsk region.
We invite you!