Pneumatic seeder of precision seeding UPS-12, VESNA 12 FAVORIT, Kirovohrad region.

Vesna-12 is a universal pneumatic seed drill designed for accurate sowing of calibrated, coated and regular seeds of sugar and fodder beets, soybeans, corn, sunflower, castor beans, sorghum, fodder beans, beans and other seeds close to them in size with simultaneous introduction of granular mineral fertilizers separately from the seeds and rolling of the soil in the rows.
In front of the working section, a clod drain is installed, which allows to remove clods and a dry layer of soil from the sowing zone.

Front roller The section provides compaction and leveling of the soil in front of the coulter for better sowing. In the basic version, the seeder is produced with a set of discs for sowing beets with forty holes with a diameter of 2.2 mm.
The modernized seed drill VESNA is equipped with a 2-circuit drive of a new design (reliable protection of the drive ensures the operation of the seeder in fields clogged with plant residues),
- gear mechanisms of a new model (steel gears),
- hydraulic markers on individual hydraulic cylinders with the possibility of adjusting the angle of attack of the marker disk, 153
- порошковая покраска деталей обеспечивает их долговечность.
To order, the seed drills are equipped with a transport device, which allows you to move them along public roads without the use of additional means of transport.
It is possible to install a seeding control system

Gives information:
• about the seeding rate (pc/m) in each seeding section;
• about the percentage of duplicates and omissions in each sowing section;
• about uniformity of sowing in each sowing section;
• about the distribution of seeds (% and cm.) along the row;
• about the distribution of seeds (% and cm.) over the entire area;
• about the working time of the seeder and the sown area of the field;
• about the speed of movement of the unit;
• on the results of the self-check of the state of the control system;(//tractor-service.com)
• on reaching the lower level of seeds and fertilized in one of the bunkers (on request);
• about performing calibration, i.e. calculates and stores in memory the slip percentage of the drivingseeder wheel after performing the option "calibration" of the track;
• about the results of sowing for each seeding device of the seeder over the entire field area and in total over the entire field area.
Delivery across Ukraine.

Main characteristics:

Gripping width, m 5.4
Number of processed lines, pcs. 12
Productivity, ha/h 7
Seed embedment depth, mm up to 120
Row width, cm 45
Volume of bunkers (total): 182
- для семян, л 300
- for fertilized, l 294
Working speed, km/h 9
Sowing norms:
- for seeds, kg/ha 2-58
- for fertilized, kg/ha 25-245
It is aggregated with tractors with power, hp. от 80