Hydraulic winches Tajfun, Kyiv

Works from the power take-off shafttractor, is installed on three hitch points. The winch has its own electro-hydraulic system. The pressure accumulator provides safe termination of winch operation in the event of disconnection of the tractor's power take-off shaft.
The service staff is a tractor driver and a choker driver.
Principle of operation:tractor drives backwards to a convenient place for parking, the tractor driver lowers the winch body to the ground with the help of the tractor's hydraulic system, turns on the power take-off shaft of the tractor, loosens the band brake of the drum with the help of the corresponding button on the control panel. The choker unwinds the rope to the required length and chokes the whips with chains. At the choker's signal, the tractor driver engages the clutch of the winch drum with the help of the corresponding button on the control panel and pulls the whips up to their stop in the skid plate of the winch. After that, he turns off the clutch, raises the sliding shield of the winch and carries out the transportation of the whips to the place of unloading. Arriving at the unloading place, the tractor driver turns off the belt brake of the drum and lowers the whips to the ground, the choker unhooks the whips. Then the freed rope is wound on the drum and with the help of the winch shield it stacks the whips. The cycle of work is repeated.