Beehive heating system SOTA 10 Basis Plus, Kiev region.

Beehive heating system SOTA 10 Basis Plus is designed for heating from 1 to 10 hives. The system includes a full set of equipment to provide bees with comfortable conditions and accelerated developmentbee families. Electric heating of SOTA beehives can be used at any time of the year. For example, in the spring, it contributes to the good growth of families, the economy of feed costs for development. With its help, beekeepers get a good harvest of May honey, as the productivity of bee colonies increases sharply.продуктивность пчелосемей. SOTA electric heating can also be used in the summer to form colonies with non-flying bees or in incubators for queens. In autumn and winter with the onset of cold, SOTA electric heating helps to maintain family health. The experience of beekeepers shows that when colonies are heated, their growth accelerates 1.5-2.0 times compared to colonies located in unheated hives. The SOTA 10 Basis Plus hive heating system is safe for bees and beekeepers. To start the heating system, it is necessary to place one heating element in each hive. The thermoregulation controller is hung on the outer wall of one of the hives where one of ten heating elements will be placed, the temperature sensor is placed inside the same hive in its upper part. The power supply unit is placed in an emptyhive, in a box or room protected from moisture. After that, you can connect the heating system to the 220V electrical network. Immediately after turning on the heating system, it is necessary to set the desired air temperature in the hive to the thermoregulation controller, for this, press the "SET" button, the indicator will start flashing, and by pressing (and holding) the "+" or "-" buttons, we achieve the required temperature. The thermoregulation controller constantly displays the current temperature in the beehive on the display with a frequency of 0.5 seconds. The SOTA 10 Basis Plus beehive heating system is easy to use and allows the beekeeper to quickly organize beehive heating in the apiary. The entire system is made of quick-connect connectors. The sizes of the heaters allow the heaters to be placed in the beehive through the letok.

Technical characteristics:

time of the system's output to working mode up to 10 min.

ambient temperature up to -25oС

voltage in the heating system 12V
(//tractor-service.com)
system power supply voltage 220V

accuracy of temperature measurements 0.1oС

heater dimensions LxWxH 140x105x4mm.

protection from short circuit

protection from overload and overvoltage

Go to the site: sotasystems.com.ua