Woodcutter (screw-type pole) DK-50, Cherkasy region.

The wood splitter is a well-thought-out design of a screwwood splitter. A conical wood chipper is a cone with a screw thread cut on it. The principle of its operation is based on the ability of the screw to be easily screwed into a wooden surface, and the cone will be gradually pushed apart by the fibers of the wooden log. Thus, a wooden log is split in half, further into four parts, etc. Our wood splitter is designed for logs up to 50 cm long and 50 cm in diameter. The screw cleaver is able to cope with hard species of wood, as the drive is carried out with the help of a flywheel, which accumulates kinetic energy, which increases the force of rotation of the screw cone. Ето препятствует закливнивании дрововний in logs of hard wood species.

If you are tired ofchopping firewood by hand, but this is quite time-consuming, energy-consuming, heavy work, which, moreover, requires a lot of time, then our conical woodchopper will be your salvation. It will significantly save your time and effort. When working on a conical sawmill, human labor is used only to put the log on the cone, and the thread is cut so that it does not take much effort, and the split firewood is thrown away.(//tractor-service.com)

Overall dimensions: D. 750 mm. Width 450 mm. H. 950 mm. Weight 80 kg.

Single-phase connection: 220v Engine: 2.2 kW/3000 revolutions.