Оборудование для упаковки в пленку дверей, окон, столешен, мебельного щита, подоконников, Киев

= rope is for packaging in the thermo -Solidal Nalosa Cellum Clea Out of the Vlaha, Muds, Drugs of Out -of Stolesnytsy from the art of art, sets of door blocks, sets Lini:

Состав линии:
Submitting roller conveyor (1)
Cross -looping setting (2)
Роликовый транспортер с продольными запайщиками (3)
Thermotonnel (4)
Distributing roller conveyor (5)
(// tractor-service.com)
Описание работы:
The two operators are stacked on a serving roller conveyor (1). The conveyor (1) is equipped with the guides, which is centrified to the passage for passing the skill of the plug -in installation (2). On this one on the Izdelie, a stitched diet can be.
Second operators are grounded through the Nalodka with roll -holders (2.1), the transverse plenkopaya installation (2), on the roller conveyor with the side relatives (3). After the full gripping of the edition for the installation (2), one from the operators, the button will press the button on the block of control (2.2) and the panel traverse (2.3) form the transverse seam of the packing of the bar. For one sinking traverse (2.3), the formation of transverse seam of the packaging of the Izdelia, the transverse seam of the packaging of the packaging from the roll and the formation On the roller transport with the lateral arches (3) operators, the sides of their sides are reminiscent of the sprout and redeem it the edge of the furniture traverses (3.1), which will come on the sides of the conveyor rollers (3). The control of the gap with the traverse (3.1) and the formation of the provenly swarm seams is drawn on the core blocks of management. After the formation of the seam, the operators strikes the selected Obeloy in the process of quarrying.
На роликовом транспортере с боковыми запайщиками (3) операторы каждый со своей стороны расправляет пленку и располагают ее края под запаечными траверсами (3.1), которые находятся по бокам от роликов транспортера (3). Управление опусканием каждой с траверс (3.1) и формирование продольных сварных швов осуществляется на собственных блоках управления. После формирования швов операторы удаляет образовавшиеся облои в процессе сваривания.
According to the formation of the subfraes of the packaging of the packaging, it is transferred to the drive -in -chief conveyor conveyor, entry into the storage of thermononel (4), and passes through the thermal concrete. In the thermal concrete, the plaster is shrinking.
From thermonnel (4) packed Izdelie is served on the release roller conveyor (5), on which there is an ocagage of the permanent Nalosa with a stream of the air from the fan.
Packed Izdelie is opened by operators.

Izotivation of the soglas indigenous is a treated reserve.
= Guarantee 12 monster