Avtomobilerezgruzchik side and through the rear axle, Dnepropetrovsk region.

Автомобилеразгрузчик механический боковой UNIVERSAL intended for mechanized unloading of grain from various models of cars, as well as road trains with one or moretrailers without their splitting through the open side board.

Compared to existing analogues, the model of our autoloader has a number of advantages, here are just some of them:

· Strength calculations of the platform and overturning devices were performed using the modern calculation complex SCAD office and confirmed by acceptance and certification tests.

· More rigid construction of the platform and overturning nodes.

· One drive is installed on all types of autoloaders, regardless of the length of the platform, which allows you to avoid loads on the twisting of the platform, which inevitably arise due to the lack of synchronicity when two drives work.

· The modern design of the drive unit is equipped with a motor-reducer of imported production (Italy, Germany) with a built-in braking mechanism, which ensures smooth lifting of the platform of the car loader - without jerks.

· Low energy consumption.

· In order to eliminate production inaccuracies, installation errors and hard-to-set thermal deformations, the drive shafts are installed on self-aligning bearings of Japanese manufacture, this increases the reliability of the product and increases the service life of the bearings several times.

· Extended warranty period.

· Lower cost compared to existing analogues.

The autoloader consists of the following main components:

· platforms;

· drive;

· transmission shafts;

· support of the left;

· support of the right;

· insurance devices;

· control panel.

Combined complex COMBI

(Unloading + weighing)

COMBINED combined complex (unloading + weighing) - intended for static weighing with display of results on a digital panel and simultaneous unloading of motor vehicles with bulk materials through an open sideboard.

The complex includes truck scales and a side loader mounted on one frame. The main advantage of this equipment is its compactness, which is especially valuable for small farms with a small area. The purchase of this complex allows you to significantly save money on the construction of the auto-weighing department.

Одноколейный Автомобилеразгрузчик IGUANA

The IGUANA single-track truck unloader is intended for unloading grain, its processing products, and other loose materials from various cars, cars-semi-trailers, as well as road trains with one or more trailers without splitting them, through an open side.

The main difference of the IGUANA model car unloader is that when unloading a motor vehicle, not the entire car is lifted, but only one side of it, the platform, at this moment, tilts in the direction of overturning.

The IGUANA unloader consists of the following units:

· set of platforms;

· hydrostation station;

· hydraulic jacks;(//tractor-service.com)

· management system;

· insurance devices.

Compared to the existing analogues, the IGUANA model of the autoloader has the following advantages:

· Strength calculations of the platform and other assembly units were performed using the SCAD office version 11.3 calculation complex and confirmed by certification and acceptance tests.

To avoid deformation of the platform sheet, the distance between the transverse partitions is made of channel No. 20, the distance between the channels is reduced to 500 mm.

· The pumping station is made of high-quality components from leading European manufacturers.

· The compactness and simplicity of the device ensures high maintainability.

· Reliability and ease of maintenance.

· The possibility of unloading vehicles on both sides.

· Substantial reduction in costs for the preparation of foundations (tolerances for construction work on the site are much more lenient than those of competitors).

· Lower energy consumption compared to analogues.

· An additional safety system against the overturning of the car is provided (similar equipment is not supplied by competing factories).

· Lower cost compared to existing analogues.

· There is a certificate of conformity.

· Increased term of warranty obligations.

Hydraulic car loader

AQUARIUS

AQUARIUS hydraulic side loader, hereinafter - avtomobile loader, intended for unloading grain crops, grain products and other loose materials through the open side of single cars and road trains weighing up to

60 volumes.

The truck loader is used at catering enterprises for work in all regions of Ukraine and neighboring countries (the Russian Federation, the Republic of Belarus, Kazakhstan, the Kyrgyz Republic, the Republic of Azerbaijan, Turkmenistan, the Republic of Tajikistan, the Republic of Armenia), in accordance with the climatic version "U".

The truck unloader must meet the documentation requirements according to TU 5141-001-64027752-2010.

The requirements for the production of auto loaders for special climatic conditions, as well as for export, must be specified individually.

The following modifications of the autoloader are developed and produced:

Автомобилеразгрузчик хидравлический боковой

AQUARIUS-S

AQUARIUS-S hydraulic side loaders are intended for unloading grain from non-dumping trucks, trucks with trailers, as well as from road trains with one or more trailers without uncoupling them through the open side.

Mobile autoloader single-track MOBY

The mobile loader is intended for mechanized unloading of grain, products of its processing, as well as other loose materials through the open side of single cars, road trains with a trailer without splitting them through the open side. The uniqueness of this car unloader is that the equipment is installed without foundations on concrete, asphalted, gravel platforms of grain streams, and thanks to the installed chassis, it can be moved without much effort using a forklift ortractor.

This autoloader has no analogues in Ukraine!