Sell Cultivator- 3-row row house /Poland/, Kyiv region.

There is a place to install cultivators Ezh.
Bomet cultivators are multifunctional tools intended for the processing of potatoes and other root crops grown on ridges. In addition, they can be used in horticulture, when growing strawberries and corn. Cultivator-hoe can be used for weed removal, loosening between rows, planting plants and forming ridges with a height of up to 60 cm.
We present 3-row and 5-row guns. The width of cultivated interrows can be adjusted in the range of up to 75 cm.
Cultivator-header is aggregated to a tractor with a power of 20 hp, (5-row from 30 hp) does not require connection to the PTO and is intended for hoeing crops, weeding and loosening between rows. An important advantage of the 5-row unit is the increased working width, so it is usually purchased for large homesteads and large farms. The weeder has five working sections that allow processing 4 full rows in the center and half a row at the edges of the unit in one pass. Ego's 3.1 m width of capture, as well as a high working speed of 8 km/h, allow processing up to 2.5 hectares per hour.
With the help of these units, it is possible to perform a wide range of different tasks: not only to hoe potatoes and other crops, but also to loosen the rows and remove weeds. To perform these works, it is necessary toremove the hillocks and install the rippers that come with the hillock-weeder.
Thanks to the fastening elements that connect the frame and the section, the width of the rows is easily adjustable in the weeder, that is, depending on the width of the rows of the crop to be processed, the distance between the sections of the unit can be adjusted up to 75 cm. Cultivators have a special shape that allows processing to be carried out as efficiently as possible, creating ridges and at the same time not damaging the roots of plants. In addition, thanks to the possibility of adjustmentkrylev kuchuchniks it is possible to choose the optimal height of the ridges, and when processing the extreme rows, neighboring beds will not fall asleep.
The depth of tillage is regulated thanks to fastening connections located on each of the sections and holding removable elements - hillers, working paws, rippers. At the same time, the depth of each of them can be adjusted separately. Uniform deepening of the entire unit is provided by supportingwheels, as well as damping springs located on each of the sections.(//tractor-service.com)
When choosing, special attention should be paid to the strength and reliability of the frame, which bears the main load during operation. The Bomet hill weeder has a one-piece metal frame, designed for maximum loads, which can easily withstand work even on wet and heavy soils. Powder coating of the frame and sections is resistant to external aggressive influences, prevents corrosion, and preserves an attractive appearance for a long time.
Gripping width, m 1.5
The number of paws-razors + claws 3+3
Row processing width, cm up to 67.5
Number of interrows, pcs. 2
Weight, kg 105
Applicability, HP ot 20