Seeder Vesta 8 Profy, Dnipropetrovsk region.

Seeder pneumatic precision seeding Vesta 8 Profi RED STAR is intended for dotted seeding calibrated and uncalibrated seeds of corn, sunflower, castor, sorghum, soy, as well as seeds of fodder beans, beans, lupins with simultaneous introduction of granular mineral fertilizers separately from the seeds and rolling of the soil in the rows. The seeding device is mounted on the frame of the section in such a way that it allows to completely exclude the influence of loads on the body of the seeding device, which in turn excludes the possibility of breakage. The location of the seeding device on the soil ensures high accuracy of seed distribution in the furrow and prevents clogging of the device with plant residues if they are present in the field, which in turn ensures uninterrupted high-performance operation of the seeder. The opening cover of the seeding device simplifies maintenance and replacement of the seeding disc when setting the seeding rate and resetting to another culture. The presence of two dischargers in the design of the seeding device - upper and lower - allows to exclude "doubles" during sowing. A harrow is attached to the seeding disk, which prevents compaction and suspension of seeds. The valve regulates the level of seeds in the intake chamber, which prevents its overflow.
The planter is equipped with SPUTNIK information device, which provides information on: - seeding rate (pcs/m) of each sowing section; – about the percentage of duplicates and omissions of each sowing section; - about the uniformity of sowing in each sowing section; - about the distribution of seeds (% and cm. ) along the row; – about the distribution of seeds (% and cm. ) over the entire area; – about the working time of the seeder and the sown area of ​​the field; - about the speed of movement of the unit; – about the results of the self-check of the state of the control system; - about performing calibration, i.e. calculates and stores in memory the slip percentage of the driveseeder wheels after performing the "calibration" option; - about the results of sowing for each seeding device of the seeder over the entire field area and in total over the entire field area. Control during the sowing process enables prompt correction of emerging deviations and guarantees accurate sowing(//tractor-service.com)

Technical characteristics of the Vesta 8 Pro seed drill Type of machine mounted mounted mounted Number of rows pcs. 8 Width between rows mm 750 700 Working speed km/h 2.5-9 Productivity ha/h 1.4-5.04 Capacity of bunkers, (total) - for seeds dm³ 288 - for fertilized dm³ 340 Sowing norms for seeds pc. /p. m. 2...57 Sowing rates for fat kg/ha 25...385 Seed placement depth mm 40-120 Aggregated with tractors with a capacity of more than l. with. 80
VESTA 8 PROFI – universal pneumatic seeders, VESTA 6 PROFI VESTA 8 PROFI RED STAR seeder, seeder, pneumatic, precision seeding, furrow seeder, buy intended for precision sowing of calibrated seeds of corn, sunflower, castor, sorghum, soybeans, as well as seeds of fodder beans, beans, lupine, with simultaneous, separate seeds, applying granulated mineral fertilizers and rolling the soil in rows. It is also possible to sow uncalibrated seeds, but in this case the accuracy will directly depend on the difference in size and the degree of damage of the seed material.Precise seed drills provide seeding at the final density, excluding the use of manual labor when forming the required interval between plants. The accuracy of seed sowing by the VESTA PROFI seeder is ensured by the new design of the seeding device. PROFI seeding device The location of the seeding device on the frame of the section allows to completely exclude the influence of various loads on the body of the device and, thus, to exclude the possibility of its breakage. The low location of the seeding device ensures high accuracy of seed distribution in the furrow. 1 Opening, not removable cover of the seeding device simplifies maintenance. 2 The upper and lower droppers of excess seeds allow you to eliminate "doubles" and carry out single-grain dosing of seeds. 3 A harrow is mounted on the seeding disc on the side of the intake chamber, which prevents compaction and hanging of seeds. 4 The valve regulates the level of seeds in the intake chamber, which prevents its overflow. 5 Sowing discs can easily be replaced with ones corresponding to the crop to be sown, the size of the seeds and the sowing rates. VESTA PROFI has grain hoppers, the volume of which has been increased to 36 liters. Due to the arrangement of the axis of the support-drive wheels on the same line with the grain coulters, simultaneous copying of the field relief is achieved by both the frame and the sowing section. The sowing section is equipped with a coulter for sowing corn and sunflower seeds. The sowing section is equipped with a 2-circuit drive of a new design. Reliable protection of the drive ensures work on fields clogged with plant residues. The fat seeding system through the fat coulters provides the possibility of applying mineral fertilizers away from the row with the necessary amount of displacement, which excludes the harmful effect of fats on the seeds. Accurate and easy adjustment of the sowing depth is ensured by the presence of a handle and a graduated scale. To order, the seed drills are equipped with a transport device, which allows you to move them along public roads without the use of additional means of transport. Control of sowing parameters on furrow seeders of the VESTA PROFI model series is provided by the SPUTNIK information device installed on the seeders, which provides information on: – the seeding rate (pieces/m) of each sowing section; – about the percentage of duplicates and omissions of each sowing section; - about the uniformity of sowing in each sowing section; – about the distribution of seeds (% and cm.) along the row; – on the distribution of seeds (% and cm.) over the entire area; – about the working time of the seeder and the sown area of ​​the field; - about the speed of movement of the unit; – about the results of the self-check of the state of the control system; - about performing calibration, i.e. calculates and stores in memory the percentage of slippage of the drive wheel of the seeder after performing the option "calibration" of the path; - about the results of sowing for each seeding device of the seeder over the entire field area and in total over the entire field area. Control during the seeding process makes it possible to quickly correct emerging deviations and guarantees accurate seeding. TECHNICAL CHARACTERISTICS VESTA 6 PROFI VESTA 8 PROFI Machine type mounted mounted Working width m 4.2 5.6 Number of rows pcs. 6 8 Row width mm 700, 750 700 Working speed km/h 2.5-9 2.5-9 Productivity ha/h 1.05-3.78 1.4-5.04 Hopper capacity, (total) - for seeds dm³ 216 288 - for fertilized dm³ 340 320 Sowing rates for seeds pc./p.m. 2...57 2...57 Sowing rates for fat kg/ha 25...385 25...385 Depth of seed placement mm 40-120 40-120 Aggregated with tractors with power, more than hp. 80