Repair, restoration, restoration of hydraulic distributors for tractors, combines, excavators, Zaporizhia region.

Distributors in the hydraulic system are used for:

1) distribution of the flow of the working fluid supplied by the pump between consumers (power cylinders, hydraulic motors), 158

2) для автоматического переключения системы на холостой ход (перепуска рабочей жидкости в бак) в периоды, когда все потребители отключены

3) to limit the pressure in the hydraulic system in case of accidental overloads in the positions of the spool "Lift" and "Forced lowering" (safety valve mode).

The first signs of malfunction of the hydraulic distributor are failure to meet the above requirements, as well as spontaneous movements or intermittent operation of the actuator. If you do not take into account direct physical damage, broken handles, blows, etc. then in 99% of cases the reasons for the failure of the hydraulic distributor are two: either a defective spool (pre-pressure pair), or the sealing elements are worn out and require replacement.

In turn, the valves of hydraulic distributors fail for the following reasons:

1) not timely replacement of filters or the working fluid itself,

2) hit by foreign objects and dirt,

3) long service life without replacement and fatigue wear.

We strongly recommend that at the first signs of a malfunction of the hydraulic distributor, it should be sent for repair (restoration) to prevent jamming and more severe breakdowns.
(//tractor-service.com)
So, what do you do when you discover a malfunction of the hydraulic distributor:

a) remove the hydraulic distributor fromtractor,excavator or other equipment, allow the working fluid to drain, pack and send to us in Melitopol by any transport company.

b) contact us and inform about the shipment.

c) after our defect, you payrepair of the hydraulic distributor.

What are we doing:

a) we get a hydraulic distributor,

b) disassemble/defect,

c) Work on the hull, if it is necessary to quarrel, boring,

d) we change the spool and repair kit, we change other worn parts,

e) we check on the stand with a beautiful one,

f) we put in the necessary documents, we send them to you.