OPSIKIVARDER OP-2000, Dnepropetrovsk Region

= Sprayer with separate feed
== ORP-2000/21

The sprayer is intended for spraying field crops with pesticides and application of liquid mineral fertilizers

= Technical characteristics: tank 2000 l

Performance for 1 hour of the main time, ha/h:
- at a grip width of 21 m 12.6 - 25.2
Tank capacity, L 2000;
Working width of grip, m 21.0
The fluid consumption rate, l/ha 50-300
Working speed, km/h 6-12
Putting of the pump=, L/min. 163;
Working pressure in injection communication, atm 1.5-8.0
The height of the sprayer
from the Earth's surface, m 0.6-1.7

Completing:

The sprayer is equipped with imported units and working bodies ( pump=, control panel, filters, nozzles - production of Italian companies "Imovilli", "Arag", sprays - German firm "Lechler"). 1. The sprayer has a special form that provides complete emptying with stable pump operation.

1. Обприскувач має бак спеціальної форми, який забезпечує повне його спорожнення при стабільній роботі насоса.
2. The sprayer has an effective (patented) rod hanging mechanism, which provides stabilization of the working organs and smooths dynamic loads in the vertical and horizontal planes, which provides high uniformity of processing and durability of the sprayer. 3. Laying and lowering, assembling and decomposition of the bar is carried out with the help of a tractor hydraulic system with fixation in the working position by means 4. Transfer of torque from the cardan shaft to
3.Піднімання і опускання, складання і розкладання штанги здійснюється за допомоги гідросистеми трактора з фіксацією у робочому положенні за допомогою гідрозамків.
4. Передача крутного моменту від карданного вала до pump is carried out due to the intermediate resistance and elastic coupling, which significantly increases its reliability and durability of work.
5. On the bar in places of possible erasure of installation of a plate from a material that has a low coefficient of friction.
= 6. For the convenience of technological maintenance, the sprayer is equipped with a special platform located near the neck of the tank.
7. At the request of the customer, the sprayer can be equipped with a onboard computer, foam marker or GPS navigation system, sprayers of different types and sizes. (// tractor-service.com)

Обприскувач з роздільною подачею
ORP-2000/18
The sprayer is intended for spraying field crops with pesticides and application of liquid mineral fertilizers

= Technical characteristics: tank 2000 l

Performance for 1 hour of the main time, ha/h:
- at a width of 18 m 10.8 - 21.6
Tank capacity, L 2000;
Working width of grip, m 18.0
The fluid flow rate, l/ha 50-300
Working speed, km/h 6-12
Pump supply, l/min. 163;
Working pressure in injection communication, atm 1.5-8.0
The height of the sprayers
from the Earth's surface, m 0.6-1.7

Completing:

The sprayer is equipped with imported units and working bodies (pump, control panel, filters, nozzles - production of Italian "imovilli", "Arag", sprays - German company "Lechler") features of the structure:

==. 1. The sprayer has a special form that provides complete emptying with stable pump operation.
2. The sprayer has an effective (patented) rod hanging mechanism, which provides stabilization of the working organs and smooths dynamic loads in the vertical and horizontal planes, which provides high uniformity of processing and durability of the sprayer. 3. Laying and lowering, assembling and decomposition of the bar is carried out with the help of a tractor hydraul 4. The transfer of torque from the cardan shaft to the pump is carried out through an intermediate resistance and an elastic coupling, which significantly increases its reliability and durability.
3.Піднімання і опускання, складання і розкладання штанги здійснюється за допомоги гідросистеми трактора з фіксацією у робочому положенні за допомогою гідрозамків.
4. Передача крутного моменту від карданного вала до насоса здійснюється через проміжну опору і еластичну муфту, що значно підвищує його надійність і довговічність роботи.
5. On the bar in the places of possible erasure of installation of a plate from a material that has a low coefficient of friction.
= 6. For the convenience of technological maintenance, the sprayer is equipped with a special platform located near the neck of the tank.
7. At the request of the customer, the sprayer can be equipped with an onboard computer, foam marker or GPS navigation system, sprayers of different types and sizes. Info .|| 224