Deltafan fans on mounting legs for animal husbandry, Rivne region.

Deltafan fans on mounting legs for livestock breeding, for poultry houses, for pig farms, for cowsheds.

Fans of the supply-exhaust ventilation system are installed in livestock premises. Basically, it is axial

fan for installation in an opening in the wall, equipped with gravity shutters.

Axial fans in a poultry house, a fan in a cowshed, and a piggery differ in the diameter of the working wheelwheels and respectively and

by productivity.

Deltafan fans on mounting legs are mounted in ventilation shafts for inflow and outflow of air from the premises.

(typical, flue, for exhaust pipes). A typical series of fans for installation in existing ducts and exhaust pipes.

Blades made of polypropylene reinforced with glass fiber (PPG). Cast aluminum sleeve. Asynchronous motors

single-phase 230V/50Hz. Degree of protection IP66. The maximum operating temperature is 60C.(//tractor-service.com)

A typical range of fans is intended for installation in existing ducts with a round or square section (for example,

gravity system). When used in channels with a square section, it is recommended to use the corresponding image

profiled intake funnel to reduce pressure losses and reduce noise level.

Standard diameter: from 355 to 630 mm. Productivity from 4,000 to 20,000 m3/h.

355/K/8-8/45/230 1350 RPM 3540 m3/h
400/K/8-8/45/230 1350 RPM 5120 m3/h
450/K/8-8/45/230 1350 RPM 7320 m3/h
500/K/8-8/40/230 1350 RPM 8310 m3/h
560/K/8-8/40/230 1350 RPM 10800 m3/h
600/K/8-8/40/230 1350 RPM 12300 m3/h
630/K/8-8/40/230 1350 RPM 13500 m3/h
630/K/8-8/50/230/L 900 RPM 12000 m3/h