Crusher of straw bales, hay KRUK 1200 RB SIPMA, Volyn region.

Straw or hay chopper SIPMA RB 1200 KRUK is designed for grinding, feeding or stretching rolls of straw, hay andsilage. The universal design of the chopper makes it possible to feed rolls of silage or spread straw in rooms with inventory and in the open area.
The rear loading wall, which is activated by a hydraulic servo motor, allows you to easily and quickly load rolls onto the machine.
The knife drum grinds the feed material and provides a large throughput and productivity of the machine.
The grid, installed in front of the knife drum, ensures uniform supply of material to the drum, protects the machine from clogging and increases its strength and reliability.
The three-section hydraulic distributor, the control levers of which are located at the operator's workplace, allows you to fully control the process fromthe tractor cabin.
The oil flow regulator in the hydraulic distributor makes it possible to control the speed of the floor conveyor. This allows you to match the linear speed of the conveyor to the type of material to be crushed and ensures optimal use of the operational capabilities of the machine.
The hydraulically controlled throwing channel allows you to direct the crushed material directly into thefeeder and adjust the throwing radius to a distance of 0.5 m (e.g., when feeding fodder) to 12 m (e.g., when spreading straw).

Model SIPMA RB 1200 KRUK (H-186)
The maximum straw spreading radius is 12 m(//tractor-service.com)
Max. feed feed height 1.20 m
Max. the width of the shredded roll is 1.20 m.
Max. diameter 1.20 m
The minimum time for grinding a roll is 2 min.
The length of the cargo body is 1.35 m.
The width of the cargo body is 1.30 m.
Turn GDP 540 rpm
Required power, 50 hp
Dimensions 3.40 x 2.0 x 1.45 m.
Weight, 1200 kg
Cardan shaft complete