Plow otvalny Pln-3, 35 with angle, Dnipropetrovsk region.

Falling plowPNV-3.35 with angled head

The PNV-3.35 plow with an angle is intended for plowing soils not clogged with stones, slate and other obstacles, under grain and technical crops to a depth of up to 30 cm, with a specific soil resistance of up to 0.09 MPa and a hardness of up to 4.0 MPa.

The main difference between an angle plow and a front plow is that the angle plow only cuts the corner of the soil layer, while the front plow removes the top layer of soil and lowers it to the bottom of the furrow. It is a small blade that is securely attached to the hull strut in such a way as to ensure that the lower corner edge of the angled blade fits as closely as possible to the surface of the blade.
Technical characteristics
Unit type
in the spring
Width of capture (m)
1.05
Productivity (ha/hour)
0.63 - 0.84
Working speed (km/h)
8 - 10
Processing depth (cm)(//tractor-service.com)
18 - 30
Number of working bodies (pieces)
3
Overall dimensions
see below
Length (mm)
2650
Width (mm)
1370
Height (mm)
1270
Mass of the unit (kg)
430
Necessarytractor power (hp)
80 - 90