Drip tapes, irrigation tubes, faucets, fittings, spray tape, Layflat, Layflat, Kherson region.

We offer a full range of original components from the Republic of Korea for drip irrigation systems. In stock: drip tape with a thickness of 5mil, 6mil, 7mil, 8mil, the distance between the drip holes is 10cm, 15cm, 20cm, 30cm. The design of the drop tape can be with a solid emitter and a separately soldered emitter.

We also have a fitting and a mini faucet for connecting a drip tape to the trunk pipe: a fitting to a plastic pipe with a rubber band, a fitting to a plastic pipe with a compression coupling, a fitting to a reinforced Layflat hose, a mini faucet to a plastic pipe with a rubber band, a mini faucet to a plastic pipe with a compression coupling, a mini faucet to a reinforced layflat hose.

Connections for drip tape: repair tape drip tape connector, drip tape connector angle, drip tape connector tee,

Plugs in a plastic pipe, plugs in a reinforced hose Layflat (layflat) in the holes where a mini faucet or fitting was located.

Reinforced layflat hose size 2" (50mm), 2.5" (63mm), 3" (75mm), 4" (100mm), 5" (125mm), 6" (150mm), 8" (200mm) pressure from 4bar to 6bar.

Spray tape (Spray, fog) for irrigation in fields and ingreenhouses, irrigation grip 6m and 10m.

Disc filters for drip irrigation: output 3/4" - throughput 5m3/h, 1"-6m3/h, 1.5"- 8m3/h, 2"-12m3/h, 2"-25m3/h 3"-55m3/h, 4"-100m3/h. Automatic and semi-automatic filters are also on sale.

Fittings and connections for connection to pumps and filters of main plastic pipes and reinforced Layflat hose.

Motor pumps for drip irrigation -60m3/h and 100m3/h with gasoline and diesel engines.

Sprayers: motor sprayers and electric sprayers (accumulator).
(//tractor-service.com)
-agro fiber разных размера;

-електронныевесы. Possible delivery in Kherson, Kherson region as well as Kyiv, Kharkiv, Odessa, Dnipropetrovsk, Donetsk, Zaporozhye, Lviv, Kryvyi Rih, Mykolaiv, Mariupol, Luhansk, Sevastopol, Vinnytsia, Makeevka, Simferopol, Kherson, Poltava, Chernihiv, Cherkassy, Zhytomyr, Sumy, Khmelnytskyi, Horlovka, Rivne, Kirovohrad, Dneprodzerzhinsk, Chernivtsi, Kremenchug, Ivano-Frankivsk, Ternopil, Belaya Tserkov, Lutsk, Kramatorsk, Melitopol, Kerch, Nikopol, Severodonetsk, Slavyansk, Berdyansk, Uzhhorod, Alchevsk , Pavlograd , Evpatoria , Lysychansk , Kamenets-Podolsky, Krym

Drip irrigation is the most economical and at the same time effective way of irrigation. The main feature of drip irrigation is the supply of water to the root zone of each plant. Thanks to this, minimal consumption of water and other resources (fertilizer, energy, labor costs) is ensured.

Drip irrigation also gives other advantages:

with the help of drip irrigation, plants receive the optimal amount of moisture throughout the growing season. This, in turn, provides intensive root respiration and promotes their active development; the drip irrigation system introduces fertilizers into the root zone together with irrigation water, thanks to which there is a faster and more intensive absorption of nutrients; drip irrigation reduces the risk of plant diseases, as there is no wetting of vegetative mass and fruits; such irrigation can be carried out even in the sun; drip irrigation prevents the spread of weeds, as the zone between the rows remains dry; drip irrigation gives the opportunity to care for plants (spray, cultivate soil, harvest) at any time: before, after and during irrigation; the drip irrigation system can be used on slopes or areas with complex relief; drip irrigation does not require high water pressure in the pipeline, which allows you to save costs on pump units; the automatic drip irrigation system allows you to regulate the depth of irrigation, quantity, quality and frequency of irrigation; drip irrigation ensures high productivity and quality of fruits.
Drip irrigation is based on a slow point supply of water through nozzles with very small holes (average size 0.5 mm). The throughput of such elements is from 1 to 8 liters per hour.

The drip irrigation system basically includes the following functional parts:

source of water supply - a place from which water is taken: natural and artificial reservoirs, underground springs, etc.; the water intake and the pumping station ensure the intake of water from the source and create the working pressure of the irrigation system;
The filter is intended for water purification from mechanical and biological contamination. The technological scheme of purification is selected on the basis of water quality, types of pipelines and requirements for the degree of purification. As a rule, drip irrigation systems have one- and two-stage purification using disc, mesh, gravel, hydrocyclone filters;

the application site is fertilized. This element of the irrigation system consists of a container for preparing fertilizers, an injector and a fertilizer head. Provides dosed application of fertilizer together with irrigation water. controller – controls the operation of the irrigation system. With its help, the time, quantity, volume of watering, etc., are programmed. main pipeline. This element of the irrigation system serves to transport water from the pumping station to the distribution pipeline. It can be made from any non-corrosive material. The diameter of the pipe is selected based on the volume of transported water, the distance to the destination, the coefficient of friction of the material;
pressure regulator - maintains constant (low) water pressure in the irrigation system. It is recommended to install the regulator when the pressure is above 2.5 atmospheres;

drainage pipe - an element of the irrigation system that serves to deliver water from the main pipeline to the drip line; air valve - intended for the release and intake of air into the irrigation system; various types of connecting and shut-off fittings - fittings, plugs, tees, corners, etc. for installing a drip irrigation system; drip lines - tubes of small diameter with holes for water release. They are located directly near the plant; Emitters or drippers are elements of the irrigation system, providing a dosed release of water from the drip line. There are different types of drippers: collapsible and non-collapsible, adjustable and non-adjustable, continuous and end. Drip irrigation systems are built in such a way that the drippers are either directly mounted in the pipe, or drip lines with built-in drippers are purchased. One dropper can be used to water several plants. For this, a splitter and tubes with tips are used. The drip irrigation system can be placed both on the surface of the earth and underground.