Oxalic acid+glycerin, Kiev region.

Set 1+1= UAH 509

Interframespaces of beehives are treated witha sprayer at a distance of 25-30 cm, at an angle of 30-40 ° C to the frames at the rate of 5-10 ml. solution for each interframe space. Spraying is carried out three times in spring, with an interval of 1 week, and in autumn, after collecting honey, at an air temperature not lower than +15 °C.

The Varroa mite kit is intended for self-production of Varroa mite strips impregnated with oxalic acid.
The set includes:
Oxalic acid (Spain) - 1 kg.;
Glycerin (Germany) – 1 kg.
Dose methods of preparing strips from the varroa mite:
For 60 cardboard strips (or veneer strips), we take 1 kg of glycerin and 600 g of oxalic acid. Heat the glycerin in thecontainer to a temperature of 60 degrees (if the temperature of the glycerin exceeds 60 degrees, oxalic acid will become formic when added). Stir the oxalic acid until the powder is completely dissolved, the liquid in the container should become transparent, if the liquid cools down quickly, you can additionally turn on a small fire, but at the same time do not allow the liquid to be heated above 60 degrees. Lower the strips of liquid, hermetically close the container for 10-12 hours. It is not recommended to use during medical collection.(//tractor-service.com)
Place the finished strips in the hive, in the hives between the frames for 40-45 days at the rate of 6-8 strips per 10 frames, depending on the degree of jamming.
Recommended strip sizes:
Height - 35 cm.
Width - 3 cm.
Thickness - 0.15 cm
Be sure to test the drug on several bee colonies (2-3) before treating the entire apiary.
Store in a place protected from moisture and light at a temperature not higher than +25°C.
Keep out of the reach of children.
WITHOUT ANTIBIOTIC
Oxalic acid, production - Spain.
Glycerin, production - Germany.