Kverneland Optima TF Profi SX high-speed precision seeding row drill - Sale, Kyiv

Optima TFprofi fromKverneland is a high-precision technology for sowing row crops. The well-known trailed seed drill Optima has received a number of updates and improvements in design.

✅ Optima TFprofi has proven itself well in aggregation with MTZ tractors.
✅ Optima SX high-speed section for sowing up to 18 km/h.
✅ Clear management of the sowing depth thanks to the massive design of the section with its own weight of 130 kg plus the possibility of additional hydraulic ballasting of the section from -40 kg to +125 kg.
✅Support wheels on an open disk allow you to work without clogging on sticky, wet soils.
✅ A coulter of a special shape together with a flexible catching wheelwheel literally "pack" the seeds into the groove, creating 100% contact with the soil.
✅ Seeder - Optima SX

Works on the principle of excess pressure. The seed is pressed by the air flow to the holes of the seeding disc, and the remaining air flow is used for the controlled transportation of the seed along the seed channel from the seeder to the bottom of the furrow.

Optima SX serial sowing sections are equipped with an e-drive II electric drive with control via the ISOBUS system. This allows the planter to work with their precision farming systems.

WORKING CHARACTERISTICS
✅ Working width 6 m
✅ Number of rows / row spacing 8 rows / 70 cm
✅ Frame type Hydraulic folding frame

EQUIPMENT OF SOWING SECTIONS
✅ Sowing section Located on a parallelogram, with hydraulic additional loading per section +100 kg
✅ SX E-drive ll overpressure seeding device with direct drive from a 12-volt electric motor and pneumatic seed acceleration (3 sets of seeding discs: 2 sets for sunflower (2430, 3230) and one for corn (3250))
✅ Hopper for seeds Polymer tanks of 60 liters per row(//tractor-service.com)
✅ Coulter for seeds Two-disc coulters, depth control using two spoke-shaped wheels
✅ Dosing device for fertilizers with a mechanical drive
✅ Fertilizer hopper 2000 l
✅ Fertilizer opener Two-disc openers with pressure up to 150 kg and protection
✅ Rolling wheels Installed V-shaped rolling wheels with a width of 25 mm with adjustment in 3 planes and wipers
✅ Turbine Driven by GDP 1000 rpm
✅ Support wheels 4 wheels size 12.5/80-18
✅ Markers Hydraulic markers
✅ Working speed Up to 18 km/h
✅ Aggregation type Trailed, on the lower traction Cat 3
✅ Additional equipment LED lighting of the working area of the seeder, a bridge for loading fertilizers

CONTROL AND ACCOUNTING
✅ Display Terminal IsoMatch Tellus GO for non-ISOBUS tractors
✅ Auxiliary systems Speed sensor, fertilizer availability sensor

DIMENSIONS, WEIGHT
✅ Length / width (in transport position) 5.3 / 3 m
✅ Weight (approximate) 2,400 kg

TRACTOR REQUIREMENTS
✅ Required power from 210 hp (154 kW)