Forklift TCM (Nissan), 2021 with side shift Model: FGE15T15, Poltava region.

Forklift truck TCM (Nissan), 2021 year with lateral displacement
Model: FGE15T15. The nominal load capacity is 1.5 tons, with a center of gravity of 0.5 meters. The maximum height of cargo lifting is 3 meters. The mast is two-section (duplex), which does not lose its load capacity at the lifting height. Gas-petrol engine, with factory gas equipment, thanks to which the loader can be started immediately on gas in the warm season without warming up the system ongasoline. 2021 hours (working hours 8853 m/h). The gearbox is reliable and common nowadays - hydromechanics (automatic with a torque converter). It is equipped with a modern economical Nissan GK21 injection engine. 4-cylinder, with a working volume of 2.1 liters and a capacity of 48 liters. with. which is famous for its reliability and unpretentiousness and is installed on trucks without special changes to this day and, most importantly, is repairable.Wheels 10 diameter on the driving axle, which improves the cross-country ability of the truck and increases its clearance. Hydraulic control is carried out by a simple and time-tested system - levers. A side-shift carriage is installed, which allows you to shift the load on the forks to the left and right by 10 cm in each direction, which significantly speeds up the work process and makes it safer.