Selling, modernized stubble grain and small seed anchor seeder szs-2, 1, Dnepropetrovsk region.

Selling, modernized stubble grain and small-seeded anchor drill
szs-2,1 for know-till technology .
A complete overhaul was made, starting with the frame.
Increased volumegrain hopper by 590 liters.
A new metal-ceramic seed drill
was installed with small seed coil, coupling, shank and washer,(//tractor-service.com)
which has a useful life of up to 10 years of operation.
A new seeding machine was installed.
New reinforced PVC seed pipes from the Eximplast manufacturing plant were installed on the funnels (watering cans).
New working bodies were installed: anchor coulters made of tool steel with hard alloy brazing. A unique stamped system of fastening the seed pipe from below to the anchor is installed, which prevents clogging during sowing. A spring with a diameter of 14 mm is installed on the bracket of the anchor opener. for greater pressure on the ground. The size of the bushings has been increased, due to which the strength of the lower and upper link increases. Bushings are installed in the bushings to lubricate the fingers, each finger is fixed to increase the life of the clip and the lower and upper link of the parallelogram. To increase the service life of the bracket, a change was made to the stop with the addition of a stiffness angle, which made it possible to reduce the load on the stop.
The bushing has been increased from 5 mm to 15 mm. The design allows you to replace the bushing during production without replacing the bracket. A battery of new addressable rolling rollers is installed, which perform a very important function of uniform deepening and germination of seeds to improve germination. A new wheel frame and rear wheel support (transport device) were installed. New oil seals and bearings from French TM were installed and replaced. A hydraulic cylinder with an adjusting nut is installed with a replacement belt set. The planter is stripped to the metal, primed and painted with TM Vagonka paint for metal products with improved resistance to atmospheric precipitation. The planter is in perfect technical condition and is ready for sowing. The price per unit is $8,500. Any form of payment is possible, including VAT on a non-cash account.
There is a system of flexible discounts and an individual approach to each client. Any form of payment is possible, including VAT on a non-cash account. A bargain is possible)