Silicone form for wax bowls Nicot, bees, rollers, wax, Dnipropetrovsk region.

We are manufacturers! Detailed video on our forms - youtube.com/watch?v=HBiZ7c6G-_A
Beware of fakes made of cheap and high-quality silicone! In cheap forms, reception of larvae is very bad!

Silicone mold for making wax bowls

Beekeepers often use artificial plastic bowls for queen cells to hatch queens and obtainroyal milk. The easiest and most effective way to make these bowls is to pour them out ofyour own wax. Wax bowls are made by pouring melted wax into a silicone mold. The advantage of the mold is that you don't need to adjust the temperature of the wax, you just pour the melted wax into the mold and remove the excess wax with a knife. Then you need to wait a few minutes and lower the form into cold water. After removing the bowls, it is absolutely necessary to wash the form from possible wax residues and then pour a new batch of bowls again.
(//tractor-service.com)
Procedure:
- melt pure beeswax
- pour wax into a silicone mold for making wax bowls
- remove the excess upper layer of wax with a knife
- wait a couple of minutes until the wax cools down a bit
- put the silicone mold for making wax bowls in a tub of cold water until the wax hardens completely (1-3 minutes depending on the temperature of the water)
- remove the template from the tub and carefully remove the finished wax bowls.