Substitute lime for plastering works 3 Stone House 1/5/10 l, Kyiv

Plasticizer "Lime substitute" TM Stone House

Field of application: Additive of complex action for the preparation of high-quality solutions. A substitute for lime in cement-sand solutions. It is designed to regulate the properties of construction mortars that are constantly exposed to atmospheric influences and have increased requirements for frost resistance and waterproofing.

Properties: active additive for air entrainment, stabilization and formation of small pores in the structure of construction mortars of various compositions and concretes. Forms closed pores in the structure; Creates the effect of "breathing" plaster Increases frost resistance; completely eliminates swelling of the solution; Maintains consistency during interruptions in work and transportation; Improves plasticity; Facilitates work with the solution; Increases strength; Eliminates stratification; Improves hydrophobic properties; Prevents corrosion of metal building elements caused by lime; Prevents the appearance of exfoliation; Prevents shrinkage.

Technical data: Dark brown liquid that does not contain chlorides; Corresponds to GOST Art. 2.7-171: 2008 T 4/6. (EN 934-2: 2001, NEQ)

Composition: based on surface-active substances.

Dosage: 0.5 - 1.0%additives of the mass of cement for cement-sand mortars
(//tractor-service.com)
0.6 - 1.2% of the mass of cement for plaster mortars.

Performance of work: Before use, mix until a uniform color is obtained. Enter together with water and thoroughly mix the construction mortar. Work should be carried out at a temperature from +5 C to +30 C

Warning! Do not enter into dry components! Do not mix with other types of additives for construction mortars and concrete.

Safety measures: Complies with sanitary and hygienic standards. Fire- and explosion-proof. When using, you should observe the rules of labor protection. Avoid contact with eyes.

Storage and transportation: in a tightly closed manufacturer's container, away from heating devices, avoiding direct sunlight. During storage, sediment may fall out, this does not affect the quality of the product.

Disposal: Do not pour residues into sewers, water bodies, soil. After completely using the plasticizer, close the emptycontainer tightly and send it to a household landfill.

Warranty period of storage: 2 years at a temperature from 0 C to +30 C if the rules of storage and transportation are observed.