Plasticizer for a warm floor 2 Stone House 1/5/10 l, Kyiv

Plasticizer "Warm floor" TM Stone House

Scope of application: used to increase the thermal conductivity of the screed and give it greater plasticity and elasticity in warm floor systems. Allows applying thin layers of solution. They are used for screed and concrete, poured and self-leveling floors, including for systems with heating. It can be used in all areas of construction, including for monolithic construction and various concrete structures.

Properties: withstands temperature fluctuations; Reduces solution consumption by up to 15%; Significantly increases heat transfer due to higher density; Increasing the mobility and plasticity of mortar and concrete; Removes air bubbles from the concrete solution; Prevents the formation of cracks; The possibility of applying thin layers; Increase in strength and resistance to abrasion; Ensures complete hydration of cement; Increases strength; Increases adhesion; Reduces shrinkage;

Technical data: The liquid is dark brown, does not contain chlorides. Corresponds to GOST Art. 2.7-171: 2008 T 2/4. (EN 934-2: 2001, NEQ)

Composition: based on high molecular weight anionic polymers and auxiliary substances.

Dosage: consumption of material from 0.5% to 1.0%additives per cement, depending on the purpose of application.(//tractor-service.com)

Performance of work: before use, mix until a uniform color is obtained. Enter together with water and mix thoroughly. Work should be carried out at temperatures from +5 C to +30 C. Do not use at temperatures below +5 C.

Warning: do not enter into dry components! Do not mix with other types of additives for construction mortars and concrete.

Safety measures: meets sanitary and hygienic standards. Fire- and explosion-proof. When using, you should observe the rules of labor protection. Avoid contact with eyes.

Storage and transportation: in a tightly closed manufacturer's container, away from heating devices, avoiding direct sunlight. During storage, sediment may fall out, this does not affect the quality of the product.

Disposal: Do not pour residues into sewers, water bodies, soil. After complete use of the plasticizer,empty container tightly close and send to a household landfill.

Warranty period of storage: 2 years at a temperature from 0 C to +30 C if the rules of storage and transportation are observed.