Mounting foam manual Rhinoceros 300 g, Kyiv

Hand-held mounting foam Rhino 300 ml (adapter for the handset) all-season

- For internal and external works;
- Wide range of working temperatures;
- High adhesive, sound-insulating and heat-insulating properties;

It is used with a convenient tube (no need for a foam gun)
It has excellent adhesion to most building materials: concrete, brick, plaster, wood, metal, etc., with the exception of Teflon, polyethylene, ice.
One-component polyurethane mounting foam in an aerosol can. Has high adhesion to most building materials: brick, concrete, plaster, wood, metal, etc. In the hardened state, it is resistant to aging processes, exposure to heat, moisture, mold, fungi, and insects. Requires protection from UV radiation.

Purpose: used for filling cavities and cracks, sealing and sealing seams and cracks, insulation of building structures, connection of various materials. Universal heat and sound insulator, fixing material during installation. For sealing window frames and wall panels, piping and cable systems, heat and sound insulation systems.

Method of application: for high-quality maximum foam output, the cylinder should be kept at a temperature from 18 ° C to + 30 ° C for at least 24 hours and thoroughly mixed (at least 1 minute) immediately before use. Clean the work surface of dirt, grease and moisten it. The surface should not be covered with frost or ice. Keep the cylinder upside down during operation! A space with a depth of more than 4 cm and a width of more than 6 cm should be filled in layers. After hardening, each subsequent layer is applied to the previous one and moistened separately. It is recommended to fill the working space by 2/3 of the volume. After complete hardening, remove excess foam mechanically, and protect the layer from sunlight. Fresh foam is recommended to be removed with a foam cleaner.(//tractor-service.com)

Technical characteristics:

Foam output: up to 65 liters.
Temperature resistance: -60C to + 100C
Temperature range of use: -10C to + 30C (optimally +20)
Hardening time (under normal conditions): 15 - 20 min.; complete hardening 12 - 24 hours.

Safety measures:
Fire hazard! Keep out of the reach of children. In case of contact with eyes, rinse immediately with running water and consult a doctor.

Storage: in a vertical position with the valve up at a temperature from +5 to + 30С in a dry place, in the factory packaging, no closer than 1.5 m from the source of fire and heating devices. DO NOT heat above +50.

Warranty period of storage: 18 months from the date of production.