Газ бутан в балоні Носоріг 220 г, Киев

Gas derivative for burners

This isgas of the highest quality in an aerosol can. Butane has a reduced vapor pressure at equivalent temperatures and is suitable for indoor and outdoor use, easy to use in the ignition system, with a convenient gas burner inlet valve and a convenient gas canister adapter. Suitable for torch welding, jewelry welding, cooking. Widely used for processing delicious caramel desserts, meat barbecue, cigarette lighter, portable stove.

Purpose
The gas in the cylinder can be used for: welding torch; jewelry welding; portable furnaces; sanitary and technical works; heating; soft soldering; street grill; fishing; portable heaters; gas stoves-heaters; in caravans and motorhomes (motorhomes) for cooking and heating; mobile cafeterias.

Advantages
Adjustable flame shape and size, one-touch piezo ignition and stabilizing plate for safety. Adjustable flame intensity can reach 1900°C, you can change the flame intensity as needed (soft fire or oblique fire).
Ignited by pressing, the flame intensity can be adjusted with the flame regulator and the air flow control valve, and the valve must be closed to extinguish the flame.
Butane is less toxic and cleaner to burn than propane and other types of fuel and, accordingly, less harmful to the environment.
During combustion, only carbon dioxide is released, and not the more deadly carbon monoxide.
Butane produces approximately 12% more energy than propane.
Ergonomic design for comfortable use in the hand.(//tractor-service.com)
Safe and easy to use, compact and portable.
Safe to use at any angle after preheating for one minute.
Multifunctional for use at home and in workshops.

Usage
Place the gas stove on a flat surface.
Remove the pan support from the top of the stove. Turn it over and set it up to support a pan or pot.
Open the lid of the cylinder on the stove. Remove the cap from your gas cylinder and carefully insert the gas cylinder into the stove.
Hold the cylinder in place straight and press on the cartridge lever to lock the gas cylinder. Make sure the gas cylinder is installed correctly before use.
Turn the control knob fully to the left to the "ignition" position until it clicks and lights up. If that doesn't work, repeat until it flashes.
Adjust the control knob to the desired flame level.
Your oven is ready to use. Do not use large pots or kettles that are larger than the stove, as this will cause the heat to be directed downwards into the stove, towards the gas cylinder. When using multiple tiles, do not place them close to each other, as this may cause the tiles to overheat.
When finished, turn the knob to the "off" position and lift the cartridge lever to the unlock position.
Make sure the flame is out and allow the stove to cool completely before disconnecting the gas cylinder. Never leave the gas cylinder inside when the stove is not in use. When you are finished, put the red protective cap back on the gas cylinder.