Coils for screw repair, Vinnytsia region.

Making coils.

Material Selection: Coils can be made from a variety of materials, including steel, stainless steel, or certain polymeric materials. The choice of material will depend on the operating conditions of the auger and the requirements for strength and wear resistance.

Measurement and Fabrication: First you need to measure the diameter and length of the auger for which you will need new turns. With the help of these measurements, you can make new coils that will correspond to the required dimensions.
(//tractor-service.com)
Making new turns: Making new turns can involve several steps, depending on the material chosen. If you decide to make the coils out of steel, you will need to cut metaldisks with the appropriate diameter and mounting holes. Then, depending on the need, you can cut grooves or serrations on the edge of the disc for stability and optimal material transport.

Attaching New Turns: When new turns are made, they must be properly attached to the auger. Bolts or other fasteners are usually used to connect the turns to the screw. It is important to ensure a reliable fastening so that the turns are not lost or come off during the operation of the auger.

Testing and Debugging: After installing new turns on the auger, it is recommended that you perform some testing and debugging to ensure that the auger is working properly. Check that the turns are carrying the material correctly and that there is no unnecessary friction or delay.

It is important to note that making and repairing auger coils can require professional skills and equipment. It is recommended to contact a specialized manufacturer or specialist if you have difficulties or need a professional approach to the manufacture and repair of auger turns.