Concreting of a tape foundation Chernomorsk, Odesskaya region.

Concreting of strip foundation Chernomorsk

When people want to build a house, the construction process always begins with concrete foundation. This stage of construction is the most responsible and requires a lot of knowledge and the presence of special equipment. Where to find specialists for high-quality foundation concreting in Chernomorsk and at reasonable prices.

Construction company Avtostroy has been working for more than a dozen years in the market of construction services in the Odesa region. Our company has a great deal of experience and an impeccable reputation. Concreting of strip foundations in Chernomorsk at the most affordable prices in the Odesa region is carried out by the construction company Avtostroy. We are out of competition, you won't find a better contractor, and that's a fact.

A strong and stable foundation is necessary for the construction of a cottage or a private house. To perform this task, it is necessary to first determine what type of foundation is needed for this type of building, taking into account the design of the structure, the geology of the site, the type of soil, and the depth of groundwater.

Foundations are different and each one is intended for different variants of project features:
Tape foundation;
Pile foundation;
Columnar foundation;
Building foundation;
Floating foundation
Foundation monolithic slab.

Of course, the most common foundation in the Odesa region, and the city of Chernomorsk is no different, is a strip foundation. Since it has no equal in terms of price-quality ratio, strength and durability.

Tape foundation is used for almost any type of private construction in Chernomorsk, Odesa Region. Its cost and speed of pouring is more affordable than other types, and strength and durability, with proper production of work, is much better than other types of structures.

The strip foundation is poured under any buildings and structures: private house, cottage, garage, shed, gazebo, cellar, fence, summer kitchen, and so on. The frequent use of a strip foundation during construction speaks of its practicality and convenience when concreting.(//tractor-service.com)

There are two types of casting tape foundations. The first option for pouring the foundation is more artisanal, that is, trenches are dug according to the plan of the load-bearing walls of the building. The reinforcing frame is knitted, the formwork is mounted, and concrete is fed directly into the trench from the mixer, poured according to the pre-marked level. Well, here is the entire pouring of the strip foundation in Chernomorsk. But I can assure you that this foundation did not get worse.

And the second option is pouring the strip foundation according to the working project prepared in advance and calculated after approval by the architect. The customer will have to spend a lot of money on such a pouring option, since if the foundation is poured according to the project, then it necessarily provides a heel, that is, a concrete base that distributes the load on the soil.

To pour a strip foundation with a heel, it is necessary to produce three times moreearthworks. The tape itself stands on a prepared, monolithic base (heel) protruding to the sides at least ten centimeters in each direction. For this, pits are dug, not trenches the width of the tape, as in the first version.
A crushed stone pillow is poured into the prepared pit, on which a small layer of low-grade concrete is poured. The concrete base is made for a solid base on which the tape foundation is poured.

After the construction of the concrete foundation, a reinforced cushion with a width of 800-1000 mm is poured around the perimeter of the future foundation. and 300 mm thick. This will be the foundation fifth.

After the concrete has hardened, you can start preparatory work for concreting the foundation tape, namely tying the spatial frame. Пространственный means the sect of the frame is connected in two rows vertically.

When the reinforcement of the foundation is completed, we proceed to the installation of the formwork. Formwork shields can be made and installed from a board (it is desirable to use a thickness of at least 40 millimeters), plywood, OSB boards and other lumber, but it is better to contact specialists with your formwork. Shields can be fastened in all possible ways. For greater reliability and stability of the formwork, we recommend backfilling the soil after installing the formwork according to the dimensions of the foundation.

After carrying out all the previously described works, you can start concreting the foundation in Chernomorsk. It is necessary to order concrete mix at a verified concrete plant. The mixture itself must be taken slowly, periodically vibrating the poured concrete with a deep vibrator, this will help the excess air to escape from the concrete and thereby make the strip foundation stronger.

Stroitelnaya "AVTOSTROY" providesits services for concreting tape foundations in Chernomorsk, Odesa region, with high quality, in the shortest possible time and at the most affordable prices. We carry out work from scratch and turnkey at the lowest prices. We perform foundation pouring for any type of construction.

Our company works in Chernomorsk, Odesa region. Our company employs professional concrete workers, reinforcement workers and engineers who work as one unified mechanism where each employee knows his place on the work site.

If you need to concrete a strip foundation for a house or other types of concrete work in Chernomorsk, contact our specialists and we will build the house of your dreams.