Tairo Protect - insecticide with a wide spectrum of action against sucking and rodent pests, Kiev region.

Tairo Protect is an insecticide with a wide spectrum of action, effectively eliminates both sucking and rodent pests that live on open parts of plants
Active substance: chlorpyrifos, 500 g/l + cypermethrin, 50 g/l

Preparative form: emulsion concentrate

Chemical group: organophosphorus compounds, pyrethroids

Culture: winter wheat, spring wheat, sugar beet, barley

Manufacturer: Novakem

Volume, l: canisters 20 l, the price is for 1 l.

Tairo Protect also helps limit the spread of plant-eating mites.
If used correctly according to the instructions, the drug does not show phytotoxicity.
Can be used in tank mixes with most insecticides, acaricides andfungicides provided the working solutions have a neutral pH.

Regulations of application:
Culture Rate of consumption Harmful objects Term of last processing beforeharvest, (days) Maximum frequency of processing

Spring wheat
0.75-1.0 l/ha
Complex of insect pests 30 1

Winter wheat
0.75-1.0 l/ha
Complex of insect pests 30 1

Barley
0.5-0.75 l/ha
Complex of insect pests 30 1

Sugar beets
0.8 l/ha
Beet weevils, shieldworms 40 2.

Benefits of use;
It has a wide range of effects on insect pests.
Effectively copes even with resistant forms of pests.
Destroys pests at all stages of their development: from eggs to adults (imago).
Acts quickly immediately after processing, providing a long-lasting protective effect.
Due to its fumigating properties, it is effective against hidden pests.
Works reliably even after rain due to deep penetration into the cuticle.
Maintains effectiveness at any temperature: both in heat and in cool conditions, where other means may lose their effectiveness.

Mechanism of action:
The insecticide is characterized by various methods of action: contact, gastric, translaminar, fumigant and repellent. It has a rapid effect on pests immediately after application and shows broad effectiveness for a long time. The tool begins to act upon direct contact, upon absorption by the pest or even in the form of vapors, providing maximum protection.

Requirements for the pH of the working solution - from 5 to 7
The consumption rate of the working fluid should be - 150 - 250 l/ha.
Time limits for people to enter pesticide-treated areas for mechanized/manual work -
wheat: 4 days /does not need,
sugar beets: 4 days/10 days

Vecta Action microfertilizer is a highly effective biostimulant fertilizer for pre-sowing seed treatment, growth activation and root system development.

Content of the active substance:
N-3.03% (37.0 g/l), P2O5-10.57% (129.0 g/l), K2O-3.61% (44.0 g/l), Fe-0.25% (3.0 g/l), Zn-0.25% (3.0 g/l), B-0.08% (1.0 g/l), Cu-0.08% (1.0 g/l), Mo-0.07% (0.9 g/l), Mn-0.016% (0.2 g/l), free L-amino acids-4.92% (60.0 g/l), polysaccharides-7.46% (91.0 g/l), phytohormones-0.09% (1.16 g/l)
Preparative form: RK (soluble concentrate)
Consumption rate: 0.3-1.5 l/t, l/ha
Packaging: 20 l box, 4 canisters of 5 l each, the price is per canister.

Advantages of microfertilizer Vecta Action:
stimulation of germination processes and the energy of seed germination;
strengthening the processes of rooting and development of the secondary root system;
strengthening of growth processes with foliar application;
providing balanced nutrition at the initial stages of plant development and increasing the winter hardiness of winter crops;
increasing drought, frost and cold resistance of plants.
Vecta Action microfertilizer formula:
N Р2О5 К2О Fe** Zn* B Cu* Mo Mn* Free L-amino acids Polysaccharides Phytohormones Density, g/cm3 pH, 1% EC, mS/cm 0.1%
% by mass 3.03 10.57 3.61 0.25 0.25 0.08 0.08 0.07 0.016 4.92 7.46 0.09 1.2-1.3 4.5-6.5 0.25
g/l 37.0 129.0 44.0 3.0 3.0 1.0 1.0 0.9 0.2 60.0 91.0 1.16
* – EDTA chelated
** – DTPA chelated.

Application of Vecta Action microfertilizer:

Cereal grains
The consumption rate is 0.5-1.0 l/t
Time of application - Pre-sowing seed treatment
Oil crops (sunflower, rape)
The consumption rate is 1.0-1.5 l/t
Time of application - Pre-sowing seed treatment

Corn
The consumption rate is 1.0-1.5 l/t
Time of application - Pre-sowing seed treatment
Industrial crops (sugar beet)
Consumption rate - 1.0-1.5 l/t
Time of application - Pre-sowing treatment of seeds

Legumes (soybeans, peas, chickpeas)
The consumption rate is 1.0-1.5 l/t.
Time of application - Pre-sowing treatment of seeds
(//tractor-service.com)
Vegetable crops (including potatoes, onions)
Consumption rate - 1.0-1.5 l/t
Time of application - Pre-sowing seed treatment

All the above cultures
Consumption rate - 0.3-0.5 l/ha
Application time - foliar feeding.

Mechanism of action of Vecta Action microfertilizer:
Nitrogen:
component of nucleic acids, amino acids and proteins;
cell division and tissue growth;
photosynthesis and metabolism;
increase in vegetative mass;
quality indicators of the harvest;
mobile in soil and plant;
reasons for reduced availability: low temperatures, compacted and cold soil, weakened microbiological activity, a large amount of plant remains, lack of moisture.

Phosphorus:
protein synthesis;
photosynthesis and energy exchange;
breathing and transpiration;
growth of the root system;
formation of seed embryos;
not mobile in the soil, mobile in the plant;
reasons for reduced availability: low soil and air temperatures, low and high pH of the soil solution.

Potassium:
enzyme activity, oxidation processes;
carbohydrate and nitrogen metabolism;
water balance and turgor of plants;
accumulation of sugars;
resistance to osmotic and thermal stresses;
partially mobile in the soil and highly mobile in the plant;
reasons for reduced availability: high temperatures, soil compaction, low activity of microorganisms.

Iron:
chloroplast synthesis and photosynthetic activity;
enzymatic activity and metabolism;
respiration and redox processes;
synthesis of nucleic acids and proteins;
accumulation of plastic substances;
not mobile in soil and plant;
reasons for reduced availability: overwetting of the soil, low or high temperatures, poor aeration, high content of organic substances.

Zinc:
formation of chlorophyll and organic compounds;
enzymatic activity and metabolism;
synthesis of phytohormones and enhancement of growth;
pollination, formation and viability of seeds;
increasing resistance to temperature fluctuations;
not mobile in soil and plant;
reasons for reduced availability: low soil temperature, soil compaction, low humus content, high calcium content in soils.

Boron:
synthesis, exchange and accumulation of nutrients;
regulation of auxin synthesis and cell formation;
plasticity of tissues forming the vascular system;
pollen viability and ovule formation;
carbohydrate metabolism and transfer of sugars;
mobile in the soil, not mobile in the plant;
reasons for reduced availability: high temperatures, lack of moisture, excessive ultraviolet radiation.

Copper:
enzymatic activity;
protein synthesis and nitrogen metabolism;
formation of chlorophyll and intensity of photosynthesis;
respiration and redox processes;
increasing resistance to stress;
not mobile in soil and plant;
reasons for reduced availability: compacted soil, high temperatures, high content of organic substances.

Molybdenum:
transformation of nitrogen in plants;
synthesis of amino acids and proteins;
metabolism and redox processes;
formation, accumulation of vitamins and carbohydrates;
increasing the activity of nodular bacteria;
partially mobile in the soil and immobile in the plant;
reasons for reduced availability: high content of organic substances, low pH values of the soil solution, high content of exchangeable aluminum.

Manganese:
synthesis of carbohydrates and enzymes;
activity of photosynthesis and metabolism;
reduction of transpiration and water balance;
formation, accumulation of sugars and vitamins;
increasing resistance to adverse conditions;
mobile in the soil, not mobile in the plant;
reasons for reduced availability: lack of moisture, low soil temperature, low light intensity, high content of organic substances.

Recommendations for using Vecta Action microfertilizer:
seed treatment is one of the most effective ways to ensure high crop yields;
the use of Vecta Action biostimulant for seed treatment ensures obtaining strong and friendly seedlings even under adverse weather conditions, enhances rooting processes and the development of a powerful root system;
the use of this product during the growing season will optimize the processes of growth and development of plants and increase their resistance to stresses of various origins.
Precautions for using Vecta Action Microfertilizer:
read the packaging label carefully before use.