New mounted mounted fertilizer spreader RAUCH Axis H50.2 EMC + W, Kiev region.

Connection type: Under hydraulics
Type: Spring.
Codes: Name
0: AXIS-Н 50.2 ЕМС + W VariSpread pro ISOBUS Hydraulic disc drive, Can be used as LS, electronic flow control ЕМС+, Weighing system, remotely controlled application system on the border and on the edge of the field on the left and right, Electronic dosing of fertilizer, prepared for work with ISOBUS tractors, VariSpread Pro: partial width adjustment control, without terminal (ordered separately, if required), consumption 65l/min
0608664: Set of discs S12 VXR Plus, made of stainless steel, abrasion-resistant coating 42 - 50m
1: Extension GLW 2000 only for AXIS 50.2
2: Protectivetent AP-L 50.2 for AXIS 50.2/50.2W
0608602: Set of discs S6 VXR Plus, made of stainless steel, abrasion-resistant coating 24 - 36 m
3: CCI 800 RAUCH ISOBUS Terminal for QUANTRON A 8" Mulit-Touch display, incl. Cable for 9-pole InCab socket (Typ A), cable for GPS/serial connector (Typ B), cable Typ N, incl. Software CCI.T-ECU, CCI.Convert, for work with ISOBUS tractors, (otherwise ISOBUS cable 6003183 Without GPS receiver!
4: ISOBUS cable fortractor for direct connection(//tractor-service.com)
5: DGPS Glonass AG-STAR incl. Cable for all CCI terminals
6: CCI.Command-Section Control software for automatic control of flaps when working with feed sections on turning lanes of the field. (requires a GPS receiver)
7: CCI. Control Task Controller software for transferring data via USB and working with application maps - a GPS receiver is required
8: CCI.Command-Parallel Tracking software for track control (requires GPS receiver)
9: Fastening for the terminal (installation in the tractor cabin)
10: Wind-Control for RAUCH APP
11: Practical test set PPS 5, with 10 trays
12: WLAN adapter for ISOBUS terminal only for AXIS H data transmission RAUCH APP/ settings/data
13: AXMAT duo sensor for AXIS H50.2EMC+W, required PPS 5
14: Spreadlight LED
width of capture: 24-36