Opening metal garage doors, Dnepropetrovsk region.

Garage metal swing gate

We make garage metal gates to order. The gate is made of sheet metal (2-3 mm).
You have a gate, and you want to change only the gate leaves. You can order sashes from us without a supporting frame. The surveyor will take all measurements, if the diagonal of the opening allows, change only the sashes, we will make and install only them. The garage door manufacturing period is 7 days.
The gate is reinforced with two stiffeners. That gives additional construction reliability. Hinges on ball bearings are designed for an impeccable service life of 500,000 cycles of opening and closing. There are anti-removal pins on the wicket and wicket. 2 pieces on each side. To fix the gate in the closed position, there are two bolts on the gate. The standard set of gates includes:
- frame, - two leaves + gate, - 4 latches, - hinges on ball bearings, - two stiffening ribs for each leaf, - anti-removal pins, - delivery + installation(//tractor-service.com)
At the discretion of the customer: - the lock is provided by the customer - overlay on the lock, - painting: - primer, - powder coating, - hammer coating, - enamel primer.
(068) 355-19-32, (068) 969-03-29, (097) 574-75-98
Https://akabud.Com.Ua
E-mail:[email protected]
Https://www.Instagram.Com/akabudkr/
Https://www.Youtube.Com/c/llcakabudkr ⠀
https://www.facebook.com/akabud