Spare parts Scoda 6s160.6х18 / 22.3Д6 / 3Д12.6NVD48.6х12 / 14.4х10.5 /13.4х8.5 / 11 in Ukraine, Kyiv

Absolutely any new engine spare parts for special vehicles. Cranes. Marine Locomotives. diesel engines of domestic and imported production

A lot of exclusive production
Apply for any node. spare part engine mechanism. diesel generator station, etc., do not specify everything on the site.

ENGINE CHN40 / 46 Pielstick
ЧН40 / 46 Cylinder sleeve 602-014-101
ENGINE SKODA 6S160
Skoda 6S160 Bushing HVSH (stainless steel) f62x62x3.5
Skoda 6S160 Injector valve (without supercharging)
Skoda 6S160 Finger (stainless steel) f55.5 / 32x142
Skoda 6S160 Plunger pair (without supercharging) f=12mm
Skoda 6S160 Radial roller bearing for generator 2315KM 15GPZ f160 / f75x37
Skoda 6S160 Podsh-k radial. ball for generator in pack.Craft 6313 2RS ф140хф65х33
Skoda 6S160 Bearing. turbines PDH 35 radial thrust SKF (AUSTRIA) 7306 BECBH036D Explorer
Skoda 6S160 Bearing. turbines PDH 35 - FAG (GERMANY) 17 029 794 ф72 / ф30x21.75 7306 B.M.P.
Skoda 6S160 Bearing. turbines PDH 35 (feed gas part) - SLF (GERMANY) 0306321 6306 MA. C3
Skoda 6S160 Sprayer 150*7*0.2
Skoda 6S160 Sprayer 150*8*0.25
Skoda 6S160 High pressure fuel oil seal
Skoda 6S160 Crankshaft and camshaft gear (flywheel ф325 / ф79, half gears - 2 pcs. Ф119 / ф145 with pinion, pinion gear and crown nut) - set
Skoda 6S160 Felt filter (spacer) ф90хф18х135

+380501031063 Ivan Anatolyevich
[email protected]

Delivery to any region of Ukraine. of Russia Kazakhstan. Moldova. Georgia. Latvia. Poland. Greece. Armenia near and far abroad

ENGINE SKODA 6L27, 5
Skoda 6L27,5 Injection valve
Skoda 6L27.5 Sprayer GOST 10579-88 140x6x0.3
Skoda 6L27,5 Elastic coupling on the shaft line VS-825
ENGINE 6NVD 26A3
6NVD 26A2 Plunger pair TNVD (left) ZW 8.135 L
6NVD 26A2 Injection valve
6NVD 26A3 Plunger pair TNVD (left) OMS Italy ZW 7.160
6NVD 26A3 Plunger pair TNVD (right) ZW 160.7
6NVD 26A3 Injection valve (9mm) OMS ZW 9х90
6NVD 26A3Pump oil 149550
ENGINE 6NVD 36
6NVD36 Cylinder sleeve for NVD-36 engine (67206003) Russia. SD1N.6.1A
ENGINE 6NVD 48A2U
6NVD48A2U Drive shaft foroil pump m-5.5 Z-8 832-36005
6NVD48A2U Drive shaft for oil pump 832-36007
6NVD48AU Piston valve insertcoolant pump. overboard water as a whole 37903
6NVD48A2U Fuel filter insert 175x100x26 / 20 D1M.48.2
6NVD48A2U Aluminum sleeve, Germany PDH50 Д1М.57.05
6NVD48A2U Disc mesh element of the engine filter NVD 48 and VD 26 / 20 EFMS 90 / 31-0.04
6NVD48A2U Cylinder cover (Russia) 83210906
6NVD48AU Compression ring nominal. ф320х8х10
6NVD48AU Compression ring with oblique lock 320x8x11.8 (48.2, 2U, A2U) D1Zh.7.4
6NVD48A2U Compression repair ring 9.0mm 2nd repair.
6NVD48A2U Compression repair ring 9.5 mm 3rd repair.
6NVD48A2U Oil removal ring (without windows) D1.Zh.7.3
6NVD48A2U Oil removal ring D1.Zh.7.8
6NVD48A2U Compression ring with windows (spec.) ф320х8х11.5
6NVD48A2U Exhaust valve manifold compensator D 1.M.18
6NVD48A2U Exhaust valve body 271086, socket bOgr. D 1.M.11.1.4
6NVD48A2U Valve f132x432
6NVD48A2U Gasket under the exhaust manifold
6NVD48A2U Gasket kr / copper under the door cover. NVD 48A2U (soldered) 398*378*1.5
6NVD48AU Gasket kr / copper under the cover of the door. NVD 48AU (solid) 375*355*1.5
6NVD48AU Sprayer OST 315007-76 140x5x0.5
6NVD48AU Fuel cam washer D1Zh.21.3.1.2-02
6NVD48AU Fuel cam washer D1Zh.21.3.1.1-02

D1P.25.1.0.2 Fuel pump pusher sleeve NVD 48 A2U
D1Zh.21.3 Set of fuel washers, Germany NVD 48 A2U

ENGINE 3D6 / 3D12
3D6 / 3D12 frame insert, thickness 5.10mm, pair
3D6 / 3D12 Insert f106x46x5
3D6 / 3D12 Reinforced bimetal insert with flange (photo)
3D6 / 3D12 Connecting rod insert (butterfly), nominal value (under groove), pair 3304-25 / 26
3D6 / 3D12 Battery mass switch VB-404-1С
3D6 / 3D12 Friction disk with overlays f470 / 185 / 150
3D6 / 3D12 Piston ring m / s f150 2.38 top
3D6 / 3D12 Piston ring m / s with a spring f150 2.38 top
3D6 / 3D12 Piston ring k / s, lock gap 0.8-0.95
3D6 / 3D12 Piston ring k / s with an oblique edge
3D6 / 3D12 Piston ring (k / s+m / s) f150x2.5x5.5
3D6 / 3D12 Rubber cylinder sleeve sealing ring (flat) 303-11А
3D6 Fresh water pump (internal circuit) SB511-00-55
3D12 Fresh water pump (internal circuit) "snail" SB1211-00-55(//tractor-service.com)
3D12 Outboard water pump SB 584-01-25
3D12 Outboard water pump of the old model
3D12 Piston (orient. p-ry f149x120 - 05-5A) 5-ty colchn. (detailed photo)
3D6 / 3D12 Red copper gasket for the nozzle ф20хф14.3х2.3 317-22
3D6 / 3D12 Exhaust manifold end gasket 518-12-1 09
3D6 / 3D12 Sprayer 7*0.25*140 "Volhodiselaparat" GOST 10579-88 SB 517.01.1
3D6 / 3D12 Reverse gear - earring 525-93
3D6 / 3D12 Reverse gear - pin 525-91-2
3D6 / 3D12 Reverse - reducer - thrust pin 525-12
3D6 / 3D12 Reverse gear - roller axle 525-86-2
3D6 / 3D12 Reverse - reducer - retaining ring 525-274
3D6 / 3D12 Regulator relay PRT-32 generators G-731 and G-732 538-115
3D6 / 3D12 PCT-20 starter relay (works with ST-710 starter) PCT-20
3D6 / 3D12 Gas distribution valve sealing ring, 17.5*25mm 506-100
3D6 / 3D12 O-ring of gas distribution valves 506-100
3D12 Connecting rod assembly 5-971 internal f shat.80mm, p.7125B, H=5450, D04AT2193 sb.3304-02
3D6 / 3D12 Electric. brush for the generator G 732 M20 p.8x20x25 chert. GA 10.347
ENGINE 2CH 8.5 / 11, 4CH 8.5 / 11, 9CH 9.5 / 11
4Ч8,5 / 11 Connecting rod insert 5Д2-25.00.25 (butterfly), set=4 pairs ВК01-4Ч-ШН-1
4Ч8,5 / 11 Block head as a whole 295 5Д4-16.01
4Ч8.5 / 11 Intake valve 5D2-160001-1
4Ч8,5 / 11 Exhaust valve 5D2-160002-1
4Ch8.5 / 11 Compression ring 5D2-250002
4Ч8.5 / 11 Upper compression ring. (chrome) 5D2-250002-03
4Ч8.5 / 11 Oil-removal ring 5D2-250004
4Ch8.5 / 11 Valve guide 5D2-160102
4Ч8.5 / 11 Block head gasket 5D4-1309
4Ч8.5 / 11 Pin sprayer 16-С42-6B
4Ch8.5 / 11 Incandescent candle SND-100-B4
ENGINE 4Ч10.5 / 13
4Ч10.5 / 13 Head for 3-ring piston (bare)
4Ч10.5 / 13 Upper compression ring (chrome) H=3.00 962.04.114
4Ч10.5 / 13 Compression ring H=3.00 962.04.102
4Ч10.5 / 13 Oil removal ring with expander H=5.00 962.04.022
4Ч10.5 / 13 Plunger pair 262.44.003-2
4Ч10.5 / 13 Sprayer 4х0.34
ENGINE 6Ч12 / 14
6Ch12 / 14 Brass screw M4x8-600 GOST 1490-62
6Ч12 / 14 Valve guide sleeve 150.05.108-1
6Ч12 / 14 Bushing of the speed regulator in the bronze assembly.
6Ч12 / 14 Suction valve 457.05.127
6Ч12 / 14 Exhaust valve 457.05.130
6Ch12 / 14 Starting valve 150.05.119
6Ч12 / 14 Pressure valve GOST 24.066.05-78 160.44.004
6Ч12 / 14 Compression ring for 3-ring piston (2 sets) 172.04.102
6Ch12 / 14 Chrome compression ring. on the 3rd circle piston (2 sets) 172.04.114
6Ч12 / 14 Oil-removal ring for 3-ring piston (2 sets) 171.04.022
6Ch12 / 14 Oil seal cuff 756.11.117
6Ch12 / 14 Outboard water pump 152.31.00-2
6Ch12 / 14 Plunger pair 160.44.003-2
6Ч12 / 14 Three-ring piston 171.04.101.2
6Ч12 / 14 Cylinder head gasket 150.03.012-1
6Ch12 / 14 Gasket 457.05.174
6Ч12 / 14 Aluminum gasket 22x27x1 B01
6Ч12 / 14 Nozzle gasket cr / copper 17x21x2.5 457.25.130
6Ch12 / 14 Spring 756.11.115
6Ч12 / 14 Internal valve spring 150.05.135
6Ч12 / 14 Valve spring external 150.05.128
6Ч12 / 14 Distribution (cam) shaft TNVD 160.44.108
6Ч12 / 14 Sprayer 5x0.43 184.25.001-02
6Ч12 / 14 Oil seal with spring 2.5-5-10
6Ch12 / 14 Oil filter. mesh met. (2 in one), length 275mm, set
6Ch12 / 14 Brass washer 756.11.118
6Ч12 / 14 Sealing washer (graphite) of the oil seal of the fresh water pump 150.11.112-2
6Ch12 / 14 Elastic washer 150.14.107
ENGINE 6Ч18 / 22
6ХН 18 / 22 Bushing of the ORN-30 regulator drive (slotted)
6ХН 18 / 22 Cylinder sleeve SD 90.6.1А
6ХН 18 / 22 Gas distribution valve
6ChN 18 / 22 Mechanic. oil seal n-sa zab. / fresh collection of water (rem. kit), qty
1. graphite washer, 1pc included. 01-340075-1
6ХН 18 / 22 Mushroom-shaped piston with valve groove 2 pcs.-14.9 kg; 2 pieces - 15.1 kg; 1 pc.-15.2 kg (05 202 72 40, 05 201 79 40, 05 195 80 40, 05 193 71 40, 05 194 73 40) 101-120-010-5
6ХН 18 / 22 Piston with pre-chamber 18, 2 kg 503 793
6ХН 18 / 22 Gasket under the cover 01-0317
6ХН 18 / 22 Gasket for exhaust manifold 01-0509-1
ChNSP18 / 22.3D6 Sprayer 140*8*0.35
ChSP 18 / 22, 3D6, 6L275) Sprayers, code 96A-24-010-4 140*8*0.3
6ХН 18 / 22 Rubber ring on the oil seal of the cooling pump 0.25-0.31-36-2-4
ENGINE G60, G70
Injection valve
The spring is big
ENGINE 6ХН25 / 34
6ЧН25 / 34 Lower insert of the thickened frame bearing 53-1101-Б-01
6ХН25 / 34 Frame insert steel-babit upper 4.46mm 53-1101-Б-02
6ЧН25 / 34 Вкладыш рамовый стале-бабитный