Plow 8 k Overum DVL 81080 F. Sweden. Kongskilde (Overum), Dnepropetrovsk region.

2011 in excellent condition,with plows. High-quality Swedish steel (thickness 7.2 mm). Ultra-strong, cast, seamless frame construction (main 250x150x8) (traction 180x180x10). The main working organs of the plow (the shelf of the front plow, the shelf, the chest, the plow disk, the ploughshare, the chisel, the field board, the knife and the bar of the field board) are made of heat-treated Overum Mucro steel, which increases the service life by two times. Each body of the blade allows plowing an average of 350 hectares. in chernozem conditions. The height of the clearance under the frame creates additional space for the pre-ploughs to work, providing optimal control of weeds and effective covering of plant residues. The most worn parts (chisel, blade chest) are attached separately, so replacement does not require much effort. Forms of dump trucks are specially developed for turning out the soil layer in an even, sequential twisting movement, the twisting curve is calculated taking into account the minimum energy consumption, the achievement of the most efficient processing and limited wear, as a result of which the ultimate economy in maintenance costs is achieved. The plowis equipped with disc knives intended for cutting the edge of the furrow (prevents the chipping of the edge, thereby facilitating the tractor's movement). Field boards provide stable movement of the body in the furrow. The body leaves a wide groove for wide tractortyres. Hydraulic adjustment of the position of the 1st hull is already included in the standard equipment. The whole suspension shaft is made of spring steel (capable of absorbing significant shock loads). It is aggregated with tractors working both in the furrow and out of the furrow. Narrow transportation width, low center of gravity and good weight distribution allow fast and safe transportation without leveling control on uneven surfaces. It is possible to equip with a new non-stop hydraulic stone release system, which has an increased lifting height of up to 50 cm. This system effectively protects all system parts, prevents overloading of material and welding seams, and increases the service life of the plow. The system has an additional battery that increases the working range for soft and careful release of stones. The pressure of the rock release resistance is regulated from the driver's seat.