Reservoir 2 cubes 2500 l for AdBlue with heating, METRIA Poland, Volyn region.

Metria 2500l tank for AdBlue (Poland), with heating

Tank 87 thousand hryvnias
OPTION (Additional equipment):
Electric heating of the distribution system (refueling module) - UAH 17,000
Electric tank heating + thermostat - UAH 13,200.
Thermal insulation of the tank with rubber foam - UAH 12,000.
Refueling module UAH 37,000 (pump , K24 counter, automatic gun with stainless steel cutter, 8m hose) = UAH 37,000. With Filter 43,000 UAH)

Weight: 210 KG
Height 2110.0 mm
Diameter 2040.0 mm
Length 2040.0 mm

Made by Metria
Country of manufacture Poland
The warranty period is 120 months.
Weight 210.0 kg
The minimum ambient temperature is -40.0 degrees.
The maximum ambient temperature is 60 degrees.
The volume of the tank is 2.5 cubic meters. m
Tank type by installation method Horizontal
Tank type by installation method Above ground
Type of tank according to the number of walls Double-walled
Tank type according to the number of sections Single section
The maximum filling volume of the tank is 2.5 cubic meters. m
Tank material Plastic

The set includes:
Metria 2500l tank for adblue (Poland) with a lockable door (lockable housing prevents unauthorized access to the equipment),
Breathing valve
Fuel level sensor and fluid leakage protection with remote indicator and warning light
Gun holder,(//tractor-service.com)
Water inlet
Inspection hatch: 600mm, 183
Монтажна плита
UV protection,
Material: seamless polyethylene.
There is grounding.

The Metria tank made of double-walled impact-resistant polyethylene is designed for the storage and distribution of AdBlue.
All tanks manufactured by METRIA are cast by rotational molding (one part) and do not have joints, seams or gluing.
The tank does not require special care and cleaning. Anti-corrosion agents are not used, water accumulation is insignificant.
Operation of the tank does not require special preparation, it consists in connecting thepump to a current source of 220,380,12,24V, monitoring the liquid level through an inspection or filling hatch, or using an indicator.

The user receives a 10-year warranty on the tank.

Optimum protection against fuel leaks and odors thanks to the use of a proven design solution - double-wall construction, which also provides high resistance to mechanical damage.
High-quality polyethylene, from which the tanks are made, and the most modern production technologies provide reliable protection against temperature changes.
Long-lasting: they do not change color, do not crack, do not corrode, are resistant to sunlight and ultraviolet rays.
The tank is installed on the street, on a flat surface. Special conditions are defined by local legislation. It is necessary to pay attention to stability. The tank must touch the soil surface tightly and stand vertically. The area cannot have edges, seams, protrusions. Before installing the tank, the surface must be thoroughly cleaned. The distance from the walls of buildings and fences should allow monitoring of the condition, liquid level, and leakage at any time.
To protect against mechanical damage, the tank must be transported empty and with attached transport belts. To avoid damage and maintain the warranty, it is necessary to observe the following provisions: do not lower or throw the tank, do not place it on sharp edges and objects, remove the transport belts only immediately before unloading. The tank is installed outside the houses.

Advantages of polyethylene tanks:
not afraid of shocks, collisions with transport, impact-resistant body;
not attached to land and place;
no need for painting/retouching;
light weight: it can be easily moved from place to place, the capacity is easy to load and transport, it is easy to move with a forklift or crane,
it is not necessary to concrete the place for installation;
elastic, insensitive to average mechanical shocks (within reasonable limits);
AdBlue consumption control,
permanent supply of AdBlue,
water does not settle inside, which can get into the diesel fuel, which is characteristic of metal ones;
absence of rust that can enter the diesel engine when using metal containers with incomplete filling;
do not heat up in the sun like metal;
easy to service, easy to service.