Bomet plow Poland, 2-3-4-5 hulls, ordinary and reversible plow, Kirovohrad region.

Plow 2-3-4-5 корпусный фирмы Bomet (PL)G-corporation plows The plow is intended for medium and deep plowing of flat fields, on all types of soils without stones.
For stony soils, it is recommended to use plows with a shear bolt that protects the housing from damage.
We offer 2-, 3-, 4- and 5-body mounted plows with a body width of 250 mm, 300 mm and 350 mm. The plow body consists of a cylindroidal shaft and a ploughshare with an elongated chisel-shaped toe of increased strength.(//tractor-service.com)
An angular ("cutting bar") is attached above the dump, which has the task of cutting the top layer of soil and dropping it to the bottom of the furrow, thereby achieving a better cover of plant residues. The plow is equipped with a screw mechanism for adjusting the grip width of the first body. The working depth can be adjusted using a steel or pneumaticsupport wheel. The used 700 mm high racks prevent the plow from being clogged with plant residues during plowing of the harvest. In front of the last body, the plow has a hole for fastening a disk knife, which is not included in the standard equipment of the tool.
The width of the case is 0.30m.
Processing depth - 350 mm
Rack height -700mm