LKT 82 after GO SPECIAL FOREST WHEEL TRACTOR with hydrostatic transmission, Ternopil region.

TECHNICAL CONDITIONS LKT 82 :
1. The machine is designed for full-fledged wood trawling by the method of winding a cable.
(double-drum winch), for free approach to wood, hydraulic crane -
manipulator with grab, for stacking logs up to 1.5 m high and moving them
dump, which can also be used for earthworks to a small depth at
easily removable soils.
The car cantow trailers without brakes weighing up to 3000 kg. Having established a three-point
attachment, the machine can be used for economic work in the forest or for
agricultural works. The machine can be equipped with a remote control.
all basic functions.
2. IVECO engine 93 kW, which meets the conditions of Euro III -
NEW.
3. Hydrostatic drive with hydrostatic converter
SAUER - DANFOSS, with two-speed manual gearbox
gears
4. Bridges with multi-disk differential lock,
electrohydraulic locking of the differential,
double-circuit brakes, wet multi-disk brakes
5. A safe cabin that meets the rules of ROPS, FOPS,
OPS, with LEXAN glass, equipped with ventilation, rotating
seat at 180 °, driving the car forward with the help of
steering wheel, joysticks and pedals
6. Axial connection of the frame (bearing) - NEW
7. A winch with two drums with a winding force of min. 2 x 80 kN with a cable diameter of 13 mm.
8. Preparation for mounting the hydraulic manipulator: support after the KR, control pedals
by car back, right DANFOSS joysticks,(//tractor-service.com)
left hand - NEW
9. Remote control TERRA FUNK
FA7,
10. Rear shield with log clamp (klembank) -
NEW
11. Wheeldiscs withtires NOKIAN 540 - 30 for
of forestry - NEW
12. Lighting ramp (on the cabin)
13. Crane-manipulator LOGLIFT F81R56, with
grabber and rotator
14. Machine with full accompanying documentation, namely:
- putting the machine into operation and operator training in written form
- technical certificate
- operating manual
- repair and maintenance instructions, catalog of spare parts
LIST OF REPAIR WORKS:
1. Dismantling LKT
2. KR gearbox
3. KR of bridges, including replacement of worn and damaged components
4. CR brake system
5. Inspection of winches, replacement of seals and defective parts, bench tests
(new cable).
6. KR of the cabin
7. KR frame, including dump, shield and fuel tanks
8. New cartridges and filters
9. electrical wiring repair
10. assembly check, running-in