Only new 2020 - Disc harrow for tractor 2.1-2.4-2.5 meters of grip for YMZ, MTZ Big selection of DISK Harrows. DISK harrow for a 2.1-2.4 meter tractor with a standard angle of attack as in AG and with adjustment of the angle of attack as in Pallada (LOOK - EVERYTHING IS VISIBLE IN THE PHOTO)
today's selection of disc harrows BDN-2.1-2.4 BDP-2.5 for processing all types of soil
- HINGED
- SEMI-TRAILER
-TRAILED
Disk harrow mounted - semi-trailer (trailer) BDN-2.1-2.4 BDP-2,5
- hinged disk harrows BDN-2.1, BDN-2.4
- semi-trailer disk harrows BDN-2.1, BDN-2.4
- trailed disc harrows BDP-2.5
BDN-2.1 - standard angle of attack - like AG-2.1-2.4
BDN-2.1- with adjustment of the angle of attack (as in Pallada
BDN-2.4 - standard angle of attack - like AG-2.1-2.4
BDN-2.4- with adjustment of the angle of attack (as in Pallada)
BDP-2.5 trailed (
wheels located in the middle of the unit - with smooth adjustment of the angle of attack) по середине агрегата - с плавной регулировкой угла атаки)
Plowing is a truly complex and painstaking process. The choice of the depth of soil cultivation, the degree of soil turnover depends on many factors, such as the type of soil, climate, the nature of crops and the needs of a particular household. Scientists have proven that the constant cultivation of the soil to a depth of less than 18 cm leads to its clogging, creates conditions for the better development of perennial weeds with a developed root system, reduces the yield of fields, and also does not allow obtaining quality indicators of grain.
Modern farmers focus on machines capable of performing both minimal surface and basic tillage, providing not only the application of fertilizers and harvest residues, but also the creation of a mulching layer, thanks to which the earth is actively saturated with oxygen and nutrients and does not dry out.
The units provide the optimal depth of soil cultivation, which varies between 7-18 cm, which allows you to perform all types of work from loosening to harrowing with layer turnover. The depth adjustment is made as well as on offset units with the help of control segments.
The harrow's multifunctionality is achieved due to the ability to change the angles of attack of the front and rear batteries. Thus, with the help of one harrow, it is possible to easily cover the harvest residues in the fall (large angles of attack of the discs) and carry out high-quality pre-sowing soil preparation in the spring (small angles of attack of the discs).
At small angles of attack, the harrow creates an ideal mixture of soil and crop residues, accelerates their processing while preserving all nutrients in the ground.
These units combined the functions of a plow, a husker, a cultivator and a disc harrow. They provide a uniform distribution of organic fertilizers and post-harvest residues over the entire depth of the treated soil layer, which increases the resistance of the soil to erosion processes and increases its ability to absorb moisture.
(//tractor-service.com)
Hinged disk harrow BDN-2.1
Gripping width - 2.1 m
Productivity 1.7 - 2.2 ha/hour
Working speed 8 - 12 km/h.
Fuel consumption 3.2 - 7.5 l/ha.
The processing depth is 5 - 20 cm.
Mass - 760 kg.
Hinged disk harrow BDN-2.4
Gripping width - 2.4 m
Productivity 2.2 - 3.1 ha/h.
Working speed 8 - 12 km/h.
Fuel consumption 3.2 - 7.5 l/ha.
The processing depth is 5 - 20 cm.
Mass - 880 kg.
Trailed disk harrow BDP-2.5-20
Type of harrow - trailed.
The width of capture is 2.5 meters.
Productivity 2.5 - 3.7 ha/h.
Working speed 8 - 12 km/h.
Fuel consumption 3.2 - 6.5 l/ha
The processing depth is 5-20 cm.
The diameter of the disk is 660 mm (bor. steel)
The mass of the harrow is 1450 kg.
It is aggregated with tractors YuMZ-6, MTZ-80,82,892
Smooth - uniform adjustment of the angle of attack of discs.
A disc harrow is a multifunctional unit for tillage. With its help, the top layer, up to 20 cm deep, is loosened, mineral and organic fertilizers are distributed, the disc cuts weeds, turning them into fertilizer. activities