Preparation of cormage for beer pulp of wet hay and straw, Kyiv region.

The Krone baler (Combi Pak 1500 v) is designed for the selection of rolls, pressing and packing of rolls in polymer film. All work processes are fully automated. The working width of the pick-up is 1.95 m; this ensures maximum performance and clean selection. MultiCut rotary cutting device, with connection to 17 knives, guarantees maximum density and grinding. Reception of fodder mass occurs clearly and without losses. A small distance between the pick-up and the cutting rotor guarantees trouble-free, clean transfer of the smallest fodder. Roll diameters from 1 to 1.5 m are possible. For the Combi Pack 1500 V, Krone has developed a new transmission system. After opening the pressing chamber, the roll is automatically transferred to the conveyor, which is equipped with an infinitely rotating elevator. Thus, the roll does NOT roll, but is pushed. The end sides have at their disposal the largest number of turns of the film winding, due to which damage to the film is excluded. Contact us and we willprepare fodder together Sincerely, Dmytro and Ivan!!!
I provide services with a RОmiLL roller flattener (Czech Republic) for flattening and canning wet corn /mash, beer groats in polymer sleeves. Wet corn grain is placed in polymer sleeves with the help of a special mobile roller flattener of the Czech manufacturer ROmiLL with a capacity of 8 to 20 tons/hour (depending on the degree of grinding). The principle of operation of these RomiLL units is as follows: wet grain is loaded into the receiving hopper of the thresher with the help of a transfer hopper or a telescopic loader, then the mass falls on rollers with a special notch. Passing through the rollers, the corn is crushed. The flattened mass is tamped with the help of an auger into a polymer sleeve, which is put on the hopper of the flattener. This type of machine can also be used for placing pulp and beer grist in polymer sleeves, using a special pulp attachment.