Glue for plastic overlays Zedex (Wolf, Germany), Kyiv

The glue consists of two components: Araldite AW 116 epoxy resin based on bisphenol and HV 953U hardener. This epoxy glue is recommended by the manufacturer Wolf Kunststoff-Gleitlager GmbH for gluing Zedex ZX-100K plastic. The resin and hardener are packaged in the recommended proportions and comply with the recommendations for the consumption of glue per unit of surface. The instructions for gluing Zedex materials (Germany) are attached and must be read before gluing. The minimum amount of dispensed glue is sufficient for gluing a 25x1000mm strip and costs UAH 150.
Guide slides made of material ZX 100K with a thickness of up to 4 mm are mounted with the help of glue. When the thickness of the material is over 4 mm, the guides are additionally fixed with screws.
The viability of the glue at a mass of 100 g and at a temperature of 23ºС is at least 90 minutes.(//tractor-service.com)
The glue hardens at a temperature not lower than 10 degrees.
You buy only the necessary amount of glue for gluing ZX-100K overlays and inserts (made in Germany).

"TD Vektor" LLC and Wolf Kunststoff-Gleitlager GmbH have nothing to do with the material with a similar marking and produced in the Russian Federation. We cannot guarantee the quality of the adhesive joint for plastic, which is produced in Russia.